2 Unit installation
2.8.3 Change in the air outlet direction (RPFI units)
The air outlet direction of the unit can be modified to adapt it to
A
installation requirements, as shown in the illustration.
1
1. Lift air outlet -A-.
2
2. Turn the air outlet on itself until it is opposite its initial position.
3. Tilt the air outlet so that the nozzle is facing forwards.
2
4. Refit air outlet -A-.
3
2
4
2.8.4 RPF: Optional PC-ART remote control location
It is possible to install the PC-ART remote control below the plastic
cover, as shown in the figure.
65
SMGB0077 rev.0 - 01/2013