Mount The Electrical Box On The Wall - Hitachi RCI-1.0FSR Service Manual

7 Servicing
RPI(L/H)-(0.4-6.0)FSRE - Ducted indoor unit
g. Mount the cover of the electrical box and fasten it with the 2 fastening screws.

7.5.3 Mount the electrical box on the wall

a. Cut the bottom, pre-cut part of the electrical box wall passage and move the electrical hose so that it comes out
the bottom of the electrical box.
b. Present the electrical box in its final location on the wall and make sure that the electrical hose is attached to the
wall free of obstacles in its path.
!
C A U T I O N
The electrical hose must not be tightened or forced at any point in its route.
c. Secure the electrical box to the wall with 2 retaining screws.
d. Mount the cover of the electrical box and secure it with the 2 retaining screws.
223 SMGB0137 rev.0 - 05/2021
7