Hitachi RCI-1.0FSR Service Manual page 266

7 Servicing
RPK-FSR(H)M - Wall mounted
11 When mounting the heat exchanger, mount it in the reverse procedure.
?
N O T E
Before mounting the heat exchanger, check to ensure that there is no clearance between the heat exchanger and the motor clamp in order
to prevent dew drops.
Take the heat exchanger out of the
256 SMGB0137 rev.0 - 05/2021
Fixing screw for right
side Heat Exchanger
Cabinet
Pull the resin plate up in the direction
of the arrow to disconnect the catch.
body as like pulling it up.
Fixing screw for left side Heat
Exchanger
Resin plate of
left side Heat
Exchanger
Slotted portion