Hitachi RCI-1.0FSR Service Manual page 127

5 Optional functions
Optional functions through Remote control
Element Optional function
Upper limit of setting
temperature for heating
Fd
(Maximum value of setting
temperature allowed in
heating)
Not used
FE
Not Used
FF
No indication of
H1
maintenance alarm
Indication of hot start
(No Indication of operation
H2
limitation)
Not used
H3
Not Used
H4
KPI: Operation modes for
the ventilation unit with
energy recovery
Not used
J1
Not used
J2
Colour of the Run
J3
indicator
Override of Start/Stop
prohibition at the remote
J4
controller
117 SMGB0137 rev.0 - 05/2021
Individual
Settings
setting
Function disabled
30 ºC is the standard maximum set
00
point. (factory setting)
-1 ºC (Upper limit 29 ºC)
01
-2 ºC (Upper limit 28 ºC)
02
-3 ºC (Upper limit 27 ºC)
03
X
·
·
·
·
·
·
-10 ºC (Upper limit 20 ºC)
10
-11 ºC (Upper limit 19 ºC)
11
-12 ºC (Upper limit 18 ºC)
12
00
- -
01
02
00
O -
01
Displayed
00
–
Hidden
01
Displayed
00
X
Hidden
01
00
– -
01 / 02
-
00
–
-
01
Air conditioning only
00
(factory setting)
O
Ventilation only
01
Air conditioning + ventilation
02
00
- -
01
00
- -
01
Green (factory setting)
00
X
Red
01
Start/Stop allowed (Factory setting)
00
Start/Stop not allowed
!
D A N G E R
X
01
Blocking of Start/Stop shall never
be set due to safety concerns.
Only Stop allowed
02
Setting conditions
This function defines the highest
temperature setting value for
HEATING mode.
Models:
RPF(I)-FSN2E
up to 20ºC (FC=10)
Use at 00 conditions
Use at 00 conditions
This function is used to display
or hide the maintenance alarm
indication.
This function is used to display
or hide the automatic control
indication.
Models:
RPF(I)-FSN2E
Not available, use at 00
conditions
Use at 00 conditions
Use at 00 conditions
This function is only available
for ventilation units with energy
recovery.
Use at 00 conditions
Use at 00 conditions
–
When there is a remote control
prohibition from a central control
device, this function overrides
this prohibition allowing the
operation of the Run/Stop button
of the remote control switch.
Models:
RPF(I)-FSN2E
Not used. Use at 00 conditions
Description
5