Micromeritics Gemini VII 2390 Confirm Installation Instructions And Checklist page 41

Gemini VII 2390 Confirm
2. Click Add to display the Add User dialog.
3. Enter the user's Windows User ID in the User Name field.
4. Enter the name that will display in the application, stored in the system log, and used for a
signature for this user in the Full Name field.
Full Name is used by the system log as the user's electronic signature and must be
unique.
5. Designate "password" as a temporary password that the user can enter to access the
application in the Password field for all users. This password is not saved in the password
history file. When the user enters this password, he will be prompted to change it. The
password to which he changes it will then be stored in the password history file.
The password must contain a minimum of six alphanumeric characters.
When you enter a password here, the user's Windows password is not changed.
6. Select the user's application access level by clicking the appropriate button. The user
access level can be one of the following:
• Administrator and Developer
• Developer only
• Analyst only
7. The Password change date field is blank and disabled because this is a new user.
8. The Change password on next logon box is checked because the user's assigned
password is temporary and must be changed when the user logs onto the application.
9. Click
OK
Feb 09
to save the user information and close the Add User dialog.
Gemini VII 2390 Confirm Installation Instructions and Checklist
Setting Up User Profiles in the Administrator Utility
35