Entering Application User Profiles - Micromeritics Gemini VII 2390 Confirm Installation Instructions And Checklist

Hide thumbs Also See for Gemini VII 2390 Confirm:

Installation instructions and checklist (113 pages)

Service manual (60 pages)

Table Of Contents

Table of Contents

Setting Up User Profiles in the Administrator Utility

4. The Remember field specifies the number of previous passwords to be stored in the

password history file for each user. This file is checked when a user enters a new password

to ensure that the password is unique.

Enter the number of passwords to be stored in the history file in the Remember field.

A zero (0) in this field means this function is not used.

5. Enter the number of times a user will be allowed to enter an invalid password when

attempting to log into the application before the application is locked in the Disable

account after field.

A zero (0) in this field means this function is not used.

6. You may specify that the User ID must match the user's Windows ID and the user must

be logged into the Windows application. This ensures that only the current Windows user

can operate the Micromeritics application. Otherwise, any user with the same access level

(Developer or Analyst) can log into the application.

To specify the matching requirement, click the Must match Windows user box to enter a

check mark.

7. The Application locked box is checked anytime the application is locked. Click the box

to lock or unlock the application. The application locks automatically when the specified

number of failed logon attempts is reached.

8. When you have completed the Configuration dialog, click

you entered.