Entering Windows User Accounts; Adding Users To Windows User Groups - Micromeritics Gemini VII 2390 Confirm Installation Instructions And Checklist

Entering Windows User Accounts

Entering Windows User Accounts
The Windows Administrator for the local computer must create user accounts in Microsoft
Windows for all persons who will use the Micromeritics application software. If you need
detailed instructions for performing this procedure, refer to Technical Bulletin Gen033.

Adding Users to Windows User Groups

Once the software has been installed, the Windows administrator must add the Micromeritics
application users to the four user groups created by the Micromeritics software during
software installation.
• CfrAdministrator
• MicDevelopers
• MicAnalysts
• MicService
If you need detailed instructions for performing this procedure, refer to Technical Bulletin
Gen033.
These user groups correspond to the four user profiles that can be assigned in the
Administrator Utility as follows:
• The CfrAdministrator user group contains the profile for the application Administrator.
It is recommended that at least two people are assigned to the group CfrAdministrator.
• The MicDevelopers user group is created to contain users who will be assigned the Devel-
oper profile in the Administrator Utility. The Developer profile enables users to develop
and enter analysis methods. A Developer has access to all functions of the Micromeritics
application.
• The MicAnalysts user group is created to contain users who will be assigned the Analyst
profile in the Administrator Utility. The Analysts profile enables users to perform analyses
using pre-defined analysis methods. An Analyst has access to a limited set of the
Micromeritics application features.
• The MicService user group is created for Micromeritics Service Personnel. These users
will be assigned the Developer profile in the Administrator Utility and have full access to
the functions of the Micromeritics application. Although Service Personnel have the same
access rights as Developers, a separate user group is created for them because Service Per-
sonnel have different directory and file access permissions.
In addition to creating user groups, the Micromeritics software also sets the Windows
directory and file access permissions for each of these user groups.The default file permissions
are included in Appendix A of the Administrator Utility User's Guide. You may modify these
settings if desired.
28 Gemini VII 2390 Confirm Installation Instructions and Checklist
Gemini VII 2390 Confirm
Feb 09