Connecting The Laser Class To Your Pc - Canon LASER CLASS 1060P User Manual

Connecting the LASER CLASS to Your PC

To connect your unit to a PC, you will need to purchase a printer cable suitable for the
interface connector on your PC:
• A Centronics
(2 meters)
-or-
• A USB cable no longer than 16.4 feet (5 meters)
You can purchase either of these cables from your local authorized Canon dealer.
Follow this procedure to connect the appropriate cable:
Connecting a USB Cable
To ensure proper operation
of the printer driver, connect
the USB cable to the unit
and PC during software
installation (1 Printer Driver
Manual).
n
• You only need to connect one of the above cables.
• If using a USB cable, make sure your PC is running Microsoft Windows
Windows
operation also needs to be assured by the manufacturer.)
2-8
Setting Up
® -compatible parallel cable (IEEE 1284-compliant) no longer than 6.6 feet
® 2000, preinstalled by a computer manufacturer on purchase. (The USB port
Connecting a Parallel Cable
Connect the parallel cable to
the unit and PC before
installing the software. Be
sure to secure the cable
connectors with the wire
clips.
® 98/Me or
Chapter 2