Connecting The Multipass To Your Pc - Canon MultiPASS C555 User Manual

Connecting the MultiPASS to Your PC

To connect the MultiPASS to your PC, you will need to purchase a printer cable that
matches the interface connector on your PC:
• A Centronics ®
(2 meters)
-or-
• A USB cable no longer than 16.4 feet (5 meters)
You can purchase either of these cables from your local authorized Canon dealer.
n
You only need to connect one of the above cables.
Follow this procedure to connect the appropriate cable:
Connecting a USB Cable
Connect the USB cable during
software installation to ensure
proper operation of the printer
driver. (1 MultiPASS Suite
User's Guide )
Connect the USB cable to the
MultiPASS and PC.
n
If using a USB cable, make sure your PC is running Microsoft Windows
Windows ®
operation also needs to be assured by the manufacturer.)
Chapter 2
-compatible parallel cable (IEEE 1284-compliant) no longer than 6.6 feet
2000, preinstalled by a computer manufacturer on purchase. (The USB port
Connecting a Parallel Cable
Connect the parallel cable to
the MultiPASS and PC. Be sure
to secure the cable connectors
with the wire clips.
® 98/Me or
Setting Up
2-7