Turn On The System - Canon PRISMAsync v3.2 Technical & Service Manual

Turn on the system

Turn on the system
You are advised to switch on the system in the following order.
1. The optional equipment (Paper and finishing modules)
2. The copier
3. The controller
NOTE
If you switch on the controller first, the omapp feature will not work!
Procedure
1. Turn on the optional equipment.
2.
Put the main power switch on top of the main unit in the 'I' position.
3. If required, wait until the controller is ready.
4.
Press the Sleep button (Moon) at the right-hand side of the operator panel.
If the controller was switched off completely press the on/off button on the controller.
NOTE
The controller needs some time to start up. In the beginning the screen will be black. Please be
patient until the splash screen is displayed.
NOTE
In some cases the system needs to reboot the engine (max. 2x) to reach the correct start-up
situation.
50 Chapter 5 - Start, shutdown and restart the system
PRISMAsync V3.2