Canon PRISMAsync v3.2 Technical & Service Manual page 34

Maintenance and Service
How to Access
Via the Maintenance tab.
Select [Maintenance] and
then [Go to service mode] .
Select [Enter System Serv-
ice] or [Engine Service]
NOTE
The Engine Service mode (during printing) is only accessible via the [Maintenance] tab in normal
user mode.
34 Chapter 4 - Using the PRISMAsync
Description
Engine state: On
Status bar: Ready
Level: Standby
Purpose:
• For all situations described above
and maintenance checks
User Interface
PRISMAsync V3.2