Turn on the system
Turn on the system
You are advised to turn on the system in the following order.
1. The host machine
2. The PRISMAsync controller
Turn on the host machine
1. Put the main power switch of the host machine in the 'I' position.
2. If required, wait until the controller is ready.
3. Press the Sleep button (Moon) at the right-hand side of the operator panel.
Turn on the PRISMAsync
Use one of the following options to turn on the controller.
1. Press the Sleep button at the right-hand side of the operator panel if the system was shut
down from the operator panel.
2. Press the on/off button of the controller
NOTE
The controller needs some time to start up. In the beginning the screen will be black. Please be
patient until the flash screen appears.
54
Chapter 5 - Start, shutdown and restart the system