System Service Mode (Prismasync Service Mode) - Canon PRISMAsync v3.2 Technical & Service Manual

System service mode (PRISMAsync service mode)

Introduction
The system service mode is the Service Diagnostic System (SDS) as available on the PRISMAsync
controller.
The SDS is used by the FST to configure, diagnose, backup and restore settings, for the print
engine, accessories and PRISMAsync controller.
System service mode (PRISMAsync service mode)
[2] Service Diagnostic System
1. Service Copy Mode
PRISMAsync V3.2
System service mode (PRISMAsync service mode)
Chapter 4 - Using the PRISMAsync 35