Checking Internal Components - Canon PRISMAsync v3.2 Technical & Service Manual

Checking internal components

Checking internal components
When checking the internal components the PRISMAsync has to be opened. See
components on page
NOTE
Please follow standard Electro Static Discharge (ESD) precautions when handling electronic
components.
Check the following:
Procedure
1. No strange objects are inside the PRISMAsync.
2.
Look for obvious loose boards. Reseat each board including DDR3 modules.
3. Look for obvious loose connectors. Reseat each connector firmly.
4.
Be sure that HDDs are connected to the right SATA port. See
page 74
112 Chapter 10 - Troubleshooting
67.
Access internal
Replace the Hard Disk Drives on
PRISMAsync V3.2