Canon PRISMAsync v3.2 Technical & Service Manual page 104

Installing patches
Install (uninstall) a Windows patch via the Operator Panel
To install or uninstall a Windows a patch via the Operator Panel take the following steps:
1. Copy the patch to a USB stick
2. Start the install patches procedure
1. On the Operator Panel in the System section of the Setup tab choose 'Local key operator
settings'.
2. Install Windows upgrade (or uninstall Windows upgrade)
3. Select the patch-file.
In the next window browse to the location were the .MSU-file with the patch resides. Select
the file and select "Install" on the Operator Panel.
4. Wait until the installation finishes.
When the installation has finished the message 'Installation successful' is shown.
5. Restart the PRISMAsync and the copier.
104 Chapter 9 - System software
PRISMAsync V3.2