Canon PRISMAsync v3.2 Technical & Service Manual page 27

• USB-stick to scan to and/or print from.
• USB-stick to store log-files
• USB-stick for installation of patches and licenses
5. [Schedule] button
Access the 'Schedule' view to manage the jobs in the schedule.
6. [Jobs] button
Access all functions to print, copy and scan documents.
• Manage or change the settings of jobs in the lists of Waiting jobs, Scheduled jobs and
Printed jobs.
• Carry out copy jobs and scan jobs.
7. [Paper tray] button
Get direct access to the tray section on the operator panel to do the following:
• Check the content of all paper trays.
• Load a new media type into a paper tray.
• Change the media type which is available in one of the paper trays.
8. [System] button
Access the System section to do the following, for example:
• Check the status of the toner, staples and other supplies.
• Read the counters
• Start maintenance.
• Set up the preferred work flows.
• Change a number of default system settings.
• Adjust the brightness and contrast of the LCD panel.
• Shut down the printer.
• View the content of the Media catalogue or add temporary media to the Media catalogue.
9. Dashboard
The dashboard displays information about the system status such as:
• Information about the current printing process.
• Information about operator intervention that is required soon.
• Information about errors.
• Information about the status of the toner reservoir and staple cartridges.
10. Status LED
This LED describes the status of the system and also applies for the operator attention light.
• Green:
The machine is busy printing. No operator attention required
• Orange:
The machine will stop soon, e.g. because an output location is almost full or more paper is
required.
• Red:
The machine has stopped, e.g. because a required media type is not available or an error
has occurred. Operator attention is required.
PRISMAsync V3.2
The operator panel
Chapter 4 - Using the PRISMAsync 27