Canon PRISMAsync v3.2 Technical & Service Manual page 117

LED
LEDCONF1)
LEDPLLLOCK1)
LEDTST[0]
LEDTST[1]
LEDTST[2]
LEDTST[3]
LEDTST[4]
LEDTST[5]
LEDTST[6]
LEDTST[7]
LEDCPLDDONE
PRISMAsync V3.2
Colour Function
Yellow Is ON, Indicating cable length of 3 m - 5.5 m
Green Is ON when clock synchronization between Controller
PC and Engine / Test PC was successful.
Green Always ON (PCI Express link status is tied high)
Green Is ON when Serial link between Controller PC and En-
gine / Test PC is initialized correctly.
Green ON when DDR is initialized
Green OFF when SOFT RST Button Pushed
Green OFF when HARD RST Button pushed
Green Always ON
Green Always ON
Green Flashing when PCI Express clock is detected.
Green Is ON when CPLD is powered and programmed
Diagnose LEDs
Chapter 10 - Troubleshooting 117