Canon PRISMAsync v3.2 Technical & Service Manual page 21

Step Action
2 Connect the other end of the power cable to a wall outlet.
Bundle the cables with a tie wrap
The PRISMAsync will be delivered with a reusable tie-wrap.
This tie wrap is used to regulate and fix all data cables to the PRISMAsync. The power cord is not
fixed with the tie wrap.
Step Action
1 Bundle all data cables and guide them in
the same direction.
2 Guide the bundle in a loop going upwards
and then downwards.
PRISMAsync V3.2
NOTE
Do not bundle the power cable
with the data cables.
NOTE
Make sure there is not too much
tension on the connectors.
Connect the PRISMAsync
Remark
Chapter 3 - Installation
4
21