Instructions for safe use Instructions for safe use Introduction All products have been tested in accordance with the strictest international safety standards. Please read the following sections before you connect the machine to the power supply. These sections contain important information with regard to the user safety and the prevention of equipment problems.
Disassemble and modification Warning • Do not remove covers and panels which are fixed to the machine. Some machines have a high-voltage component or a laser beam source inside that could cause electrical shock or blindness • Do not modify this machine, because this could cause a fire, electrical shock or breakdown.
Instructions for safe use Grounding Warning • Connect the power cord to an electrical outlet (wall socket) that is equipped with a grounding terminal. • This equipment was not designed for connection to an IT power system. An IT power system is a voltage network in which the neutral wire is not grounded.
• LCD display. Do not rub, press or touch the display surface with hard material, because the polarizer at the surface can be easily scratched. The LCD module consists of glass. Therefore, the LCD module can damage when you drop, pinch strongly or punch the module.
Instructions for safe use Chapter 1 - Instructions for safe use...
Regulation notices Regulation notices Introduction This section describes the regulation notices. Radio Interference suppression (all countries except USA) Warning: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. FCC approval (USA-only) This system has been tested and found to comply with the limits for a class A digital device, pursuant to part 15 of the FCC Rules.
Button cell specification Button cell location Motherboard Caution: Canon / Océ does not accept any liability for any damage or consequences, if the batteries are removed by persons other than Canon / Océ authorized service technicians. Button cell...
Regulation notices End of Life; WEEE (EU-only) The symbol "the crossed-out wheeled bin" indicates that at end-of-life of the equipment separate collection is required in the EU Member States. The black bar specifies that the appliance is put on the market after August 13, 2005. Reference: Directive 2002/96/EC. Contact your local organization for further information.
Regulation notices Automatic duplex Using both sides of paper reduces paper costs, national energy consumption and the amount of paper in the waste disposal process. Therefore, thePRISMAsync is default set for automatic duplex copying and printing. Chapter 2 - Regulation notices...
Caution labels and notations Caution labels and notations Introduction You can find the power-marking label at the bottom side of the controller. If connection to a different mains voltage is required, contact your authorized service representative. Do not remove caution labels or caution notations. If a label or notation is soiled, please clean the label or notation.
Printing for Professionals Creating global leadership in printing Canon and Océ have joined forces to create the global leader in the printing industry. For our customers, this combines Canon and Océ technology with the support of the Océ direct sales and service organizations. Look to the new Canon-Océ...