Preface - Canon PRISMAsync v3.2 Technical & Service Manual

Preface

Preface
Application
This manual has been issued for qualified persons to learn technical theory, installation,
maintenance, and repair of products.
This Service Manual is written for world-wide markets.
As such it may contain information relating to accessories or licensed functionality not supported
by Canon U.S.A., Inc. as of the date of the manual publication.
Corrections
This manual may contain technical inaccuracies or typographical errors due to improvements or
changes in products. When changes occur in applicable products or in the contents of this
manual, Océ will release technical information as the need arises. In the event of major changes
in the contents of this manual over a long or short period, Océ will issue a new edition of this
manual.
The following paragraph does not apply to any countries where such provisions are inconsistent
with local law.
Trademarks
The product names and company names used in this manual are the registered trademarks of the
individual companies.
Copyright
This manual is copyrighted with all rights reserved. Under the copyright laws, this manual may
not be copied, reproduced or translated into another language, in whole or in part, without the
written consent of Océ.
Safety and emissions compliance
The imagePRESS Server has been certified to meet or surpass the following government
standards:
Safety approvals: EMI/EMC approvals:
• UL 60950-1 (TUV/CU mark)
• FCC Class B
• CSA 22.2 #60950-1
• VCCI Class B
• EN 60950-1 (TUV/GS mark)
• EN55022 Class B CB scheme IEC 60950-1
• EN55024 AS/NZS CISPR22: 2004 Class B
CAUTION
All parts inside the PRISMAsync have a fire safety class V2 or higher.
It is therefore forbidden to store objects or paper (USB-key, reports etc.) inside the PRISMAsync
controller
8 Chapter 1 - Preface
PRISMAsync V3.2