SNMP Trap Hosts Menu
SNMP Trap Hosts
Main Menu\System Management\SNMP/TL1
The SNMP Trap Hosts Menu (see
nations) and SNMP versions for notification of a trap. A trap is an automatic alert, or notifi-
cation, sent to an IP Address. The Total Access 1248 system forwards SNMP traps to all
configured hosts as the traps occur.
TID: TA1248
Unacknowledged Alarms: None
Set IP address to enter Trap Host. Set IP address to D to delete Trap Host
The SNMP Trap Hosts menu options are shown in
Option
Description
1
IP Address
2
Version
3
IP Address
61179641AL1-5C
Configuration\SNMP Trap Hosts\
Figure
Total Access 1248
SNMP Trap Hosts
1. IP Address
0.0.0.0
2. Version
3. IP Address
0.0.0.0
4. Version
5. IP Address
0.0.0.0
6. Version
7. Trap Port
162
Selection :
'?' - System Help Screen
Figure 5-47. SNMP Trap Hosts Menu
Table 5-47. SNMP Trap Hosts Menu Options
5-47) is used to set multiple IP Addresses (trap desti-
Table
5-47.
Function
This option is used to configure the first SNMP trap host
IP address in decimal dot format (i.e., ###.###.###.###).
This option is used to configure the SNMP version for the
first SNMP trap host. Options include the following:
• SNMPv1
• SNMPv2
This option is used to configure the second SNMP trap
host IP address in decimal dot format (i.e.,
###.###.###.###).
Menu Descriptions
5-75