Page 1 /E 1 ® Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Document Number: 61179641AL1-5C CLEI Number: VAMDA00A_ _ September 2007...
Page 2 In no event will ADTRAN be liable for any special, incidental, or consequential damages or for commercial losses even if ADTRAN has been advised thereof as a result of issue of this document.
Page 3: Revision History
Revision History Revision Date October 2004 November 2005 September 2007 Conventions The following typographical conventions are used in this document: This font indicates a cross-reference link. indicates screen menus, fields, and parameters. This font indicates keyboard keys ( HIS FONT are shown with a plus sign ( same time This font indicates references to other documentation and is also used for emphasis.
Page 4 Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Training ADTRAN offers training courses on our products. These courses include overviews on product features and functions while covering applications of ADTRAN product lines. ADTRAN provides a variety of training options, including customized training and courses taught at our facilities or at customer sites.
Page 5: Table Of Contents
Section 1 Introduction ..............1-1 General .
Page 6 Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Section 4 Provisioning Defaults ............4-1 Introduction .
Page 7 Test IP Address Menu ............5-66 Time/Date Adjust Menu .
Page 8 ADTRAN Technical Support ........
Page 9 Figure 1-1. Total Access 1248 ............. 1-1 Figure 1-2.
Page 10 Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Figure 5-25. ATM Port Cell Count Summary Screen ..........5-42 Figure 5-26.
Page 11 Figure 5-72. E1 PM Main Menu ............5-108 Figure 5-73.
Page 12 Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Figure 5-119. Select Shelf Menu ............5-169 Figure 5-120.
Page 13 Table 1-1. Front Panel LEDs ............. . 1-3 Table 1-2.
Page 14 Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Table 5-36. Static IP Settings - for IP over Ethernet Menu Options ....... . 5-61 Table 5-37.
Page 15 Table 5-83. Operation Mode for Facility Menu Options ......... 5-118 Table 5-84.
Page 16 Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice This page is intentionally blank. 61179641AL1-5C...
Page 17: Introduction
GENERAL The Total Access 1248 (see Figure (DSLAM) system that is used to further extend Asymmetrical Digital Subscriber Line (ADSL) services in the network. TOP:POTS BOTTOM: ADSL+POTS PORTS 1-24 61179641AL1-5C Section 1 Introduction 1-1) is a Digital Subscriber Line Access Multiplexer / E 1 1179641AL1 TOP:POTS...
Page 18: Description
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice DESCRIPTION The Total Access 1248 is a mini-DSLAM that accepts up to four T1 network feeds assigned to a single IMA group. Inverse Multiplexing over ATM (IMA) is a technology used to bond multiple (DS1) links into a single data pipe.
Page 19: Front Panel Leds
Front Panel LEDs Figure 1-2 shows the location of the Total Access 1248 front panel LEDs. Upon initial powering, the Total Access 1248 system performs a power up self-test. Once the power up self-test is complete, the status LEDs reflect the condition of the hardware. TOP:POTS BOTTOM: ADSL+POTS PORTS 1-24...
Page 20: Compliance
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Compliance Electrostatic Discharge (ESD) can damage electronic modules. When handling modules, wear an antistatic discharge wrist strap to prevent damage to electronic components. Place modules in antistatic packing material when transporting or storing.
Page 21 Per GR-1089-CORE the Total Access 1248 is designed and intended for installation as part of a Common Bonding Network (CBN). The Total Access 1248 is not designed nor intended for installation as part of an Isolated Bonding Network (IBN). Per GR-1089-CORE Section 9, the Total Access 1248 is intended to be deployed in either a DC-C (common) or DC-I (isolated) installa- tion of the Total Access 1248.
Page 22 Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice This page is intentionally blank. 61179641AL1-5C...
Page 23: Introduction
Application Guidelines INTRODUCTION The Total Access 1248 provides 48 ADSL2+ plus POTS ports downstream to the subscriber, one to four T1 IMA ports upstream to the network, local and remote management capabilities, and front panel LEDs that indicate status. the Total Access 1248. Voice Switch or DLC Providing 1-48 POTS POTS Ports 1-24 TOP:POTS...
Page 24: Expansion
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice EXPANSION Up to four Total Access 1248 systems can be connected together (see units must be a Total Access 1248 Host unit (e.g., P/N 1179641AL1) and the others are Total Access 1248 Client units (P/N 1179641L5).
Page 25: Installation
After unpacking the Total Access 1248, inspect it for damage. If damage has occurred, file a claim with the carrier and then contact ADTRAN Customer Service. Refer to Warranty” for further information. If possible, keep the original shipping container to return the Total Access 1248 for repair or for verification of shipping damage.
Page 26: Shipping Contents
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Shipping Contents The shipping container for the Total Access 1248 includes the contents shown in Table 3-1. Total Access 1248 Shipping Contents Description Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem...
Page 27: Installation Prerequisites
2. Make sure that local power is available and that the required fuses are installed. The maximum power draw for the Total Access 1248 system is 75 watts. ADTRAN recommends an external fuse rated at 3.0 amps. 3. Complete Table 3-2 with the information that is needed to turn-up and provision the Total Access 1248.
Page 28: Installation Steps
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice INSTALLATION STEPS The following steps are required to install the Total Access 1248. Each step has an associated procedure which is referenced below the step. Each procedure provides detailed information for completing the step.
Page 29: Mounting The Total Access 1248
Mounting the Total Access 1248 The Total Access 1248 is shipped with two sets of mounting brackets that accommodate either a 19-inch or 23-inch rack. • The mounting brackets used for a 19-inch rack are part number 3265540. • The mounting brackets used for a 23-inch rack are part number 3265541. The mounting brackets provide for flush or mid-mounting configurations.
Page 30: Flush-Mount
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Flush-mount For flush-mount systems, the Total Access 1248 must be mounted from the front of the rack, with mounting brackets in the flush-mounting orientation (see mounting a Total Access 1248 in the rack, use a #2 phillips-head screwdriver and attach the mounting brackets to the front screw holes with the flanges containing the slotted rack- mounting holes facing the front of the Total Access 1248.
Page 31: Mid-Mount
Mid-mount For mid-mount systems, the Total Access 1248 must be mounted from the front of the rack, with mounting brackets in the mid-mounting orientation (see Total Access 1248 in the rack, use a #2 phillips-head screwdriver and attach the mounting brackets to the rear screw holes with the flanges containing the slotted rack-mounting holes facing the front of the Total Access 1248.
Page 32: Ground Connection
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Ground Connection The ground wire must be 12 to 18 AWG, however, it must be as large or larger than the wire used for power. The Total Access 1248 must be grounded to a reliable grounding source.
Page 33: Power Connection
1. With the power disconnected at the source, remove approximately 1/4-inch of insulation from the ends of both power wires. ADTRAN recommends an external fuse rated at 3 amps. 2. Using a small flat-head screwdriver, loosen the setscrews on the top of the terminal block.
Page 34: Fans/Fan Filter
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Fans/Fan Filter The Total Access 1248 is shipped with a pre-installed fan module (P/N 1179675L1). The fan module is located on the right side of the unit, and contains four fans (see fans move filtered air (if the filter is installed) into the Total Access 1248 chassis and out through the exhaust slots on the left side.
Page 35: Ethernet Connection
Ethernet Connection The Total Access 1248 interfaces with networks for management through an Ethernet port (see Figure 3-7). PORTS 1-24 Figure 3-7. Total Access 1248 Ethernet Port The following Ethernet protocols are supported: • IEEE 802.3, 10/100Base-T • DHCP Client Mode for Management •...
Page 36: Alarm Connections
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Alarm Connections The Total Access 1248 provides an alarm port (see inputs and three alarm outputs (Major, Minor, and Critical). If load shedding is active then the Critical alarm output will be active.
Page 37: Network Connections
Network Connections Network connections are accomplished via the 50-pin amphenol connector labeled Figure 3-9 . See Table 3-4 (see PORTS 1-24 Figure 3-9. Total Access 1248 Network Connection Table 3-4. T1/E1/Modem Interface Pinout Pin Numbers 1, 26 2, 27 3, 28 4, 29 5, 30 6, 31...
Page 38: Adsl2+ Plus Pots Connections
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice ADSL2+ Plus POTS Connections The Total Access 1248 utilizes four 25-pair amphenol connectors (see used as follows: • Two amphenols for connection to the POTS pairs •...
Page 39: Pots Connection
POTS Connection The Total Access 1248 must be connected to a POTS source to provide POTS to the subscribers. In a standard configuration, the POTS will be brought in from a nearby cross- connect. The Total Access 1248 accepts the POTS signal on the top two amphenol connectors labeled POTS.
Page 40: Table 3-5. Pots And Adsl+Pots Cable Pin Assignments For Left-Most Connectors
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Table 3-5. POTS and ADSL+POTS Cable Pin Assignments for Left-most Connectors Pair # Table 3-6. POTS and ADSL+POTS Cable Pin Assignments for Right-most Connectors Pair # 3-16 Pins R.T.
Page 41: Total Access 1200F Conversion
TOTAL ACCESS 1200F CONVERSION The order of subtended Total Access 1200 Series DSLAMS must be preserved when connecting to the Total Access 1200F for transla- tion to the legacy ATM mode PVCs. See Table 3-7. Order of Subtended Clients Total Access 1200F Expansion Port Existing Total Access 1200 Series DSLAM installations require a software upgrade to convert the Total Access 1200 Series DSLAMs to function with a Total Access 1200F.
Page 42 Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice 3. Press and hold the key on the terminal keyboard and apply power to the Total Access 1200 Series DSLAM. 4. When prompted, select 38400 for a faster transfer rate (20 minutes at 38400 compared to 60 minutes at 9600).
Page 43: Quick Turn-Up Steps
QUICK TURN-UP STEPS Perform the following steps to complete a basic T1 turn-up of the Total Access 1248 system: 1. Connect VT100 terminal or personal computer emulating a VT100 terminal to the Total Access 1248 craft port. For more information, refer to 2.
Page 44: Figure 3-13. Total Access 1248 Main Menu
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice TID: HSVL00001 Unacknowledged Alarms: None Figure 3-13. Total Access 1248 Main Menu 5. Provision the appropriate network termination. 6. From the Total Access 1248 Main menu, select...
Page 45: Figure 3-15. T1 Main Menu
8. The T1 Main Menu (see TID: HSVL00001 Unacknowledged Alarms: None 9. From the T1 Main Menu, select The T1 Provisioning menu (see TID: HSVL00001 Unacknowledged Alarms: None Figure 3-16. T1 Provisioning Screen 61179641AL1-5C Figure 3-15) displays. Total Access 1248 T1 Main Menu 1.
Page 46 Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice 10. From the T1 Provisioning menu, configure the setting to match the settings of the T1s provided. Press configure and continue this process until all the T1s are properly configured.
Page 47: Figure 3-17. Test Ip Address Menu
30. Add the IP address to the network routers/servers. 31. Press until the System Management menu displays. 32. From the System Management menu, select The Test IP Address menu is displayed (see TID: HSVL00001 Unacknowledged Alarms: None 1. IP Address 2.
Page 48 Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice This page is intentionally blank. 3-24 61179641AL1-5C...
Page 49: Provisioning Defaults
Provisioning Defaults INTRODUCTION The Total Access 1248 system default provisioning options are shown in detailed information on the Total Access 1248 menus, refer to Table 4-1. Default Provisioning Options Provisioning Option Available Options ATM Circuit Options PVCs User definable (Each ADSL connection must have at least one PVC/PVP for data flow.) Traffic Descriptors...
Page 50 Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Table 4-1. Default Provisioning Options (Continued) Provisioning Option Available Options IP Address IP Feed RFC1483 Routed; IP over Ethernet; RFC1483 Bridged IP Mode Dynamic; Static IP Address 0–255.0–255.0–255.0–255...
Page 51 Table 4-1. Default Provisioning Options (Continued) Provisioning Option Available Options External Alarms Alarm Name 25-character string Alarm Severity Critical; Major; Minor; Load shedding Fan Alarm Delay 0–15 minutes Network Port E1 Provisioning E1 Framing FAS; FAS+CRC E1 Line Code HDB3; AMI T1 Provisioning T1 Type DSX;...
Page 52 Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Table 4-1. Default Provisioning Options (Continued) Provisioning Option Available Options Service Mode Multimode; T1.413; G.dmt; G.lite; ADSL2; ADSL2.lite; ADSL2+; READSL; Legacy Multimode Cabinet Mode Disabled; Enabled Hamband Mask Disabled;...
Page 53: User Interface
INTRODUCTION This section provides detailed information on the following: • “System Management” on page 5-1 • “Logging on to the Total Access 1248” • “Menu Structure” on page 5-4 • “Menu Navigation” on page 5-5 • “Menu Tree” on page 5-9 •...
Page 54: Inband Management Interface
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Most personal computers or laptops can run communications software that emulates a VT100 terminal. Windows programs such as Terminal or HyperTerminal are two such examples in the Windows format, but there are many other adequate, commercially available software packages, virtually all of which allow the PC or laptop to emulate a VT100 terminal.
Page 55: Logging On To The Total Access 1248
LOGGING ON TO THE TOTAL ACCESS 1248 To logon to the Total Access 1248 system, perform the following steps: 1. Establish the physical connection to the Total Access 1248. 2. If a craft port session is being used, proceed to step 3. If using a Telnet session proceed to step 4.
Page 56: Menu Structure
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice MENU STRUCTURE The menu structure for the Total Access 1248 is a layered menu tree. Each layer of the menu tree is displayed as a menu or a screen.
Page 57: Menu Navigation
MENU NAVIGATION Basic menu navigation is accomplished by selecting the desired option number and then pressing . To return to the previous menu, press the NTER System Help screen, press the question mark ( Hot Keys Table 5-1 shows the general keyboard commands, and keys for the Total Access 1248 system.
Page 58 Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Table 5-2. Menu Specific Hot Keys (Continued) Hot Key Description This hot key is used to display the previous port. This hot key is used to display the next port.
Page 59 Table 5-2. Menu Specific Hot Keys (Continued) Hot Key Description IMA Performance Monitoring Status (Facilities) This hot key is used to display performance monitoring statistics for the last 2 hours, in 15 minute intervals. This hot key is used to clear the performance monitoring statistics. This hot key is used to display performance monitoring statistics for the next 2 hours, in 15 minute intervals.
Page 60 Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Table 5-2. Menu Specific Hot Keys (Continued) Hot Key Description This hot key is used to select a specific port. Performance Monitoring Status This hot key is used to display performance monitoring statistics for the last 2 hours, in 15 minute intervals.
Page 61: Menu Tree
Table 5-2. Menu Specific Hot Keys (Continued) Hot Key Description This hot key is used to display events in time ascending/descending order. This hot key is used to toggle between displaying the connection method and associated user name for each event, or the IP address for each event. This hot key is used to display security events.
Page 62: Figure 5-3. Total Access 1248 Main Menu Tree
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice 1. Configuration Total Access 1248 2. ATM Circuit Management 3. System Management 4. Network Port 5. DSL Menus 6. System Alarms 7. System Event Log 8. Contact Information 9.
Page 63: Figure 5-4. System Management Menu Tree
1. Password Control 2. IP Address 3. Test IP Address 4. Time/Date 5. Baud Rate 6. TFTP Configuration Upload/Download Figure 5-4. System Management Menu Tree 61179641AL1-5C 1. Set Passwords 2. Allow SNMP Security Management 3. Set Menus Idle Logout Time 4.
Page 64 Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice 7. SNMP/TL1 8. Download New Code 9. Restore Factory Defaults 10. Reset System 11. Self Test Results 12. External Alarms 13. Expansion Menu 14. Modem Configuration System Uptime Figure 5-4.
Page 65: Figure 5-5. Network Port Menu Tree
1. T1/E1 Provisioning 1. T1/E1 2. T1/E1 Status 3. T1/E1 Performance 4. Test 5. Restore T1/E1 Factory Defaults 6. SNMP/Menu Loopback Detection 7. Inband Loopback Detection 8. FDL Loopback Detection 1. IMA Configuration 2. IMA 2. Provisioning 3. Status/Failure Monitoring 4.
Page 66: Figure 5-6. Dsl Menu Tree
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice 1. DSL Profiles 1. ADSL Provisioning 2. Alarm Profiles 3. Port Provisioning 4. Restore ADSL Provisioning 1. ADSL Status 2. ADSL Status 2. All ADSL Ports Status 3.
Page 67: Menu Descriptions
MENU DESCRIPTIONS Main Menu Main Menu\ The Total Access 1248 Main menu (see The Main menu options have several functions and submenus that identify and provide access to specific operations and parameters. TID: TA1248 Unacknowledged Alarms: None Figure 5-7. Total Access 1248 Main Menu The Total Access 1248 Main menu options are shown in Table 5-3.
Page 68 Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Table 5-3. Total Access 1248 Main Menu Options (Continued) Option Description System Event Log Contact Information Enter TL1 Mode Logoff 5-16 Function This option displays the “System Event Log Screen”...
Page 69: Configuration Screen
The Configuration screen (see instance, the CLEI Code and Part Number can be used to search for related information on the ADTRAN web site or to order additional parts. The software revision may be required when calling the ADTRAN Technical Support.
Page 70: Atm Circuit Management Menu
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice ATM Circuit Management Menu ATM Circuit Management Main Menu\ATM Circuit Management\ The ATM Circuit Management menu (see maintain customer circuits. From this menu, a Permanent Virtual Circuit/Permanent Virtual Path (PVC/PVP) for each ATM circuit can be viewed, created, or modified.
Page 71: Pvc/Pvp Management Menu
PVC/PVP Management Menu PVC/PVP Management Main Menu\ATM Circuit Management\PVC/PVP Management\ If expansion mode is enabled (refer to page 5-90), the Select Shelf menu (see or client unit must be chosen in order to access the PVC/PVP Management menu. TID: TA1248 Unacknowledged Alarms: None The PVC/PVP Management menu (see PVCs.
Page 72: Figure 5-11. Pvc/Pvp Management Menu
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Page 1 of 1 Circuit ID Circuit ID: Select: Service PCR(0+1) Best Effort Endpoint 1: Port Enter # or arrow keys to pick circuit; space bar for choices or c,d,m,n,o,p,v,q Figure 5-11.
Page 73: Create A New Pvc/Pvp Screen
Create a New PVC/PVP Screen Create New PVC/PVP Main Menu\ATM Circuit Management\PVC/PVP The Create a New PVC/PVP screen (see connections. Each ADSL connection has at least one PVC/PVP per ATM circuit provisioned for data flow. PVC/PVPs map ATM circuits from the network to the ADSL ports. Port Netw ____________________________________________________________...
Page 74: Table 5-8. Pvc/Pvp Service Options
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Table 5-7. Create a New PVC/PVP Screen Fields (Continued) Field Service Circuit ID Pkt Discard Table 5-8. PVC/PVP Service Options Service Description Unspecified bit rate Constant bit rate •...
Page 75: Delete An Existing Pvc/Pvp Screen
Delete an Existing PVC/PVP Screen Delete Existing PVC/PVP Main Menu\ATM Circuit Management\PVC/PVP When the hot key is selected to delete a PVC/PVP, a confirmation prompt at the bottom of the screen (see Figure 5-13) displays. Page 1 of 1 Circuit ID Circuit ID: Select: Service...
Page 76: Modify An Existing Pvc/Pvp Screen
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Modify an Existing PVC/PVP Screen Modify Existing PVC/PVP Main Menu\ATM Circuit Management\PVC/PVP The Modify an Existing PVC/PVP screen (see PVPs. Port Netw ____________________________________________________________ Service Circuit ID...
Page 77: Table 5-10. Pvc/Pvp Service Options
Table 5-9. Modify an Existing PVC/PVP Screen Fields (Continued) Field Service Circuit ID Pkt Discard Table 5-10. PVC/PVP Service Options Service Description Unspecified bit rate Constant bit rate • PCR • Peak Cell Rate VBR-rt Variable bit rate real time •...
Page 78: Current Atm Oam Statistics Menu
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Current ATM OAM Statistics Menu Current ATM OAM Statistics Main Menu\ATM Circuit Management\PVC/PVP The Current ATM Operations and Maintenance (OAM) Statistics menu (see displays the network and line side OAM information for each ATM circuit.
Page 79: Table 5-12. Current Atm Oam Statistics Menu Fields
The Current ATM OAM Statistics menu fields are shown in Table 5-12. Current ATM OAM Statistics Menu Fields Field Endpoint 1 Rx OAM Cells AIS State RDI State Endpoint 2 Rx OAM Cells AIS State RDI State 61179641AL1-5C Table Description This field displays the total number of received OAM cells for Endpoint 1.
Page 80: Oam Loopback Test Menu
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice OAM Loopback Test Menu OAM Loopback Test Main Menu\ATM Circuit Management\PVC/PVP Management\Current ATM OAM The OAM Loopback Test menu (see mation for each ATM circuit. TID: TA1248...
Page 81: Table 5-14. Oam Loopback Test Menu Fields
Table 5-13. OAM Loopback Test Menu Options (Continued) Option Description Send from Endpoint 1 to Network Send from Endpoint 2 to Customer Reset Loopback Statistics The OAM Loopback Test menu fields are shown in Table 5-14. OAM Loopback Test Menu Fields Field Endpoint 1 Port...
Page 82 Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Table 5-14. OAM Loopback Test Menu Fields (Continued) Field Tx Loopback Response Rx Loopback Response Loopback Passed Loopback Failed Modem Status 5-30 Description This field displays the total number of transmitted loopback responses.
Page 83: Current Atm Pvc Performance Menu
Current ATM PVC Performance Menu Current ATM PVC Performance Main Menu\ATM Circuit Management\PVC/PVP The Current ATM PVC Performance menu (see information for each ATM circuit. TID: TA1248 Unacknowledged Alarms: None Endpoint 1 Port VPI 1000 Endpoint 1 (Net --> Cust) Tx Cells Discarded Queue Full Cells/Sec (Last Sec)
Page 84: Table 5-16. Current Atm Port Performance Menu Fields
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice The Current ATM PVC Performance menu fields are shown in Table 5-16. Current ATM Port Performance Menu Fields Field Endpoint 1 (Net --> Cust) Tx Cells...
Page 85: Atm Quick Provisioning Menu
ATM Quick Provisioning Menu ATM Quick Provisioning Main Menu\ATM Circuit Management\PVC/PVP The ATM Quick Provisioning menu (see based on reference circuits. TID: TA1248 Unacknowledged Alarms: None This screen allows quick creation of ATM circuits based on the reference circuit above. All the highlighted attributes will increment by one 47 times. Figure 5-18.
Page 86: Figure 5-19. Atm Pvc/Pvp Management Menu With 48 Pvcs
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Figure 5-19 shows the ATM PVC/PVP Management menu after creating new ATM circuits using the ATM Quick Provisioning menu with the settings shown in Page 1 of 5...
Page 87: Atm Traffic Parameter Defaults Screen
ATM Traffic Parameter Defaults Screen ATM Traffic Parameter Defaults Main Menu\ATM Circuit Management\ATM Traffic Parameter Defaults The ATM Traffic Parameter Defaults screen (see the ATM circuits. Traffic parameters represent priorities given to ATM cell transmissions. Once traffic parameters are set from this screen, all PVC/PVPs provisioned from that point forward will use these parameter defaults.
Page 88: Restore Atm Factory Defaults Menu
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Restore ATM Factory Defaults Menu Restore ATM Factory Defaults Main Menu\ATM Circuit Management\Restore ATM Factory Defaults\ The Total Access 1248 provisioning system provides the ability to restore the ATM parameters to the factory defaults.
Page 89: Table 5-19. Restore Atm Factory Defaults Menu Options
Table 5-19. Restore ATM Factory Defaults Menu Options Option Description Delete All PVCs and Restore Default Settings Delete Host PVCs Delete Client 1 PVCs Delete Client 2 PVCs Delete Client 3 PVCs 61179641AL1-5C Function This option deletes all PVCs and restores ATM factory defaults without additional prompting.
Page 90: Atm Performance Monitoring Mode Menu
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice ATM Performance Monitoring Mode Menu ATM Performance Monitoring Mode Main Menu\ATM Circuit Management\ATM Performance Monitoring Mode\ If expansion mode is enabled (refer to page 5-90), the Select Shelf menu (see or client unit must be chosen in order to access the ATM Performance Monitoring Mode menu.
Page 91: Figure 5-23. Atm Performance Monitoring Mode Menu
TID: TA1248 Unacknowledged Alarms: None This screen allows you to view the ATM stats for a particular port. Enter 0 for the network port or 1 - 48 for the customer ports. Figure 5-23. ATM Performance Monitoring Mode Menu The ATM Performance Monitoring Mode menu options are shown in Table 5-20.
Page 92: Atm Performance Monitoring Status Screen
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice ATM Performance Monitoring Status Screen ATM Performance Monitoring Status Main Menu\ATM Circuit Management\ATM Performance Monitoring The ATM Performance Monitoring Status screen (see mance for the port selected. This menu lists the cell transmitted to the Network, cells trans- mitted to the customer, discarded cells, and the HEC Error count for the selected performance period.
Page 93: Table 5-22. Atm Performance Monitoring Status Hot Keys
Table 5-22. ATM Performance Monitoring Status Hot Keys Hot Key Description Backward (2hrs/15min PM) Clear PM Status Forward (2hrs/15min PM) Previous Port Next Port Select Port 61179641AL1-5C Function This hot key is used to display performance monitoring statistics for the last 2 hours, in 15 minute intervals. This hot key is used to clear the performance monitoring statistics.
Page 94: Atm Port Cell Count Summary Screen
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice ATM Port Cell Count Summary Screen ATM Port Cell Count Summary Main Menu\ATM Circuit Management\ATM Performance Monitoring The ATM Port Cell Count Summary screen (see for all ports simultaneously.
Page 95: Clear All Pm For All Ports Menu
Clear All PM for All Ports Menu Clear All PM for All Ports Main Menu\ATM Circuit Management\ATM Performance Monitoring The Clear All PM for All Ports option is selected from the Menu. The Clear All PM for All Ports menu options are shown in Table 5-24.
Page 96: Atm Oam Settings Menu
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice ATM OAM Settings Menu ATM OAM Settings Main Menu\ATM Circuit Management\ATM OAM Settings\ The ATM OAM Settings menu (see OAM settings and to test the Inband channel PVC for an ATM fed system.
Page 97: Inband Oam Loopback Test Menu
Inband OAM Loopback Test Menu Inband OAM Loopback Test Main Menu\ATM Circuit Management\ATM OAM The Inband OAM Loopback Test menu (see 1248 OAM Loopback settings and to test the Inband channel PVC for an ATM fed box. TID: TA1248 Unacknowledged Alarms: None Port VPI Tx Loopback Request Rx Loopback Request...
Page 98: Table 5-27. Inband Oam Loopback Test Menu Fields
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice The Inband OAM Loopback Test menu fields are shown in Table 5-27. Inband OAM Loopback Test Menu Fields Field Port Tx Loopback Request Rx Loopback Request...
Page 99: System Management Menu
System Management Menu System Management Main Menu\System Management\ The System Management menu (see following subsections describe these settings in detail. TID: TA1248 Unacknowledged Alarms: None Figure 5-28. System Management Menu The System Management menu options are shown in Table 5-28. System Management Menu Options Option Description Password Control...
Page 100 Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Table 5-28. System Management Menu Options (Continued) Option Description SNMP/TL1 Download New Code Restore Factory Defaults Reset System Self Test Results External Alarms Expansion Menu Modem Configuration...
Page 101: Password Control Menu
Password Control Menu Password Control Main Menu\System Management\Password Control\ The Password Control menu (see times, and restore default passwords. The system provides up to eleven user accounts. TID: TA1248 Unacknowledged Alarms: None Figure 5-29. Password Control Menu The Password Control menu options are shown in Table 5-29.
Page 102: Password Control Levels Screen
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Password Control Levels Screen Password Control Levels Main Menu\System Management\Password The Password Control Levels screen (see associated passwords that access the system. TID: TA1248 Unacknowledged Alarms: None...
Page 103: Allow Snmp Security Management
5. Enter the password again when prompted to verify, and press 6. Press the key to navigate to the Access Level field. The Access Level field displays in reverse video. 7. Press the spacebar to change the access level, and press 8.
Page 104: Mode Selection And Current Ip Settings Menu
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Mode Selection and Current IP Settings Menu Mode Selection and Current IP Settings Main Menu\System Management\Mode Selection and Current IP Settings\ To remotely manage the Total Access 1248 system, the IP settings must be configured using...
Page 105: Table 5-31. Mode Selection And Current Ip Settings Menu Items
Table 5-31. Mode Selection and Current IP Settings Menu Items Option Description IP Feed Mode Configure IP The Media Access Control (MAC) address, which is set at the factory, is required to configure the DHCP server. 61179641AL1-5C Function This option provides 3 choices for the selection of IP Feed type: •...
Page 106: Static Ip Settings - For Ip Over Atm Menu
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Static IP Settings - for IP over ATM Menu Static IP Settings - for IP over ATM Main Menu\System Management\Mode Selection and Current IP The Static IP Settings - for IP over ATM menu (see all of the IP settings.
Page 107 Table 5-32. Static IP Settings - for IP over ATM Menu Options (Continued) Option Description Default Gateway TFTP IP address TL1 Port Number (set >1023) TL1 IP Transport type Reset IP Factory Defaults The Media Access Control (MAC) address is set at the factory. 61179641AL1-5C Function This option is used to configure the Default Gateway.
Page 108: Restore Ip Factory Defaults Menu
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Restore IP Factory Defaults Menu Restore IP Factory Defaults Main Menu\System Management\Mode Selection and Current IP Settings\Static IP Settings - for IP over Defaults\ The Restore IP Factory Defaults menu (see factory defaults.
Page 109: Dynamic Ip Settings - For Ip Over Atm Menu
Dynamic IP Settings - for IP over ATM Menu Dynamic IP Settings - for IP over ATM Main Menu\System Management\Mode Selection and Current IP The Dynamic IP Settings - for IP over ATM menu (see the IP settings. When the Mode option is set to Dynamic, the Total Access 1248 system automatically retrieves the IP address, Subnet mask, and Default Gateway from the remote DHCP server.
Page 110: Table 5-34. Dynamic Ip Settings - For Ip Over Atm Menu Items
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Table 5-34. Dynamic IP Settings - for IP over ATM Menu Items Option Description IP address Subnet mask VPI/VCI Default Gateway TFTP IP address TL1 Port Number (set >1023)
Page 111: Restore Ip Factory Defaults Menu
Restore IP Factory Defaults Menu Restore IP Factory Defaults Main Menu\System Management\Mode Selection and Current IP Settings\Dynamic IP Settings - for IP over Defaults The Restore IP Factory Defaults menu (see defaults. If Restore IP Factory Defaults is selected remotely, IP connectivity is lost.
Page 112: Static Ip Settings - For Ip Over Ethernet Menu
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Static IP Settings - for IP over Ethernet Menu Static IP Settings - for IP over Ethernet Main Menu\System Management\Mode Selection and Current IP The Static IP Settings - for IP over Ethernet menu (see provision all of the IP settings.
Page 113: Table 5-36. Static Ip Settings - For Ip Over Ethernet Menu Options
Table 5-36. Static IP Settings - for IP over Ethernet Menu Options Option Description IP address Subnet mask Default Gateway TFTP IP address TL1 Port Number (set >1023) TL1 IP Transport type Reset IP Factory Defaults The Media Access Control (MAC) address is set at the factory. 61179641AL1-5C Function This option is used to configure the IP address in...
Page 114: Restore Ip Factory Defaults Menu
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Restore IP Factory Defaults Menu Restore IP Factory Defaults Main Menu\System Management\Mode Selection and Current IP Settings\Static IP Settings - for IP over Factory Defaults\ The Restore IP Factory Defaults menu (see factory defaults.
Page 115: Dynamic Ip Settings - For Ip Over Ethernet Menu
Dynamic IP Settings - for IP over Ethernet Menu Dynamic IP Settings - for IP over Ethernet Main Menu\System Management\Mode Selection and Current IP The Dynamic IP Settings - for IP over Ethernet menu (see some of the IP settings. When the Mode option is set to Dynamic, the Total Access 1248 system automatically retrieves the IP address, Subnet mask, and Default Gateway from the remote DHCP server.
Page 116: Table 5-38. Dynamic Ip Settings - For Ip Over Ethernet Menu Items
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Table 5-38. Dynamic IP Settings - for IP over Ethernet Menu Items Option Description IP address Subnet mask Default Gateway TFTP IP address TL1 Port Number (set >1023)
Page 117: Restore Ip Factory Defaults Menu
Restore IP Factory Defaults Menu Restore IP Factory Defaults Main Menu\System Management\Mode Selection and Current IP Settings\Dynamic IP Settings - for IP over Factory Defaults\ The Restore IP Factory Defaults menu (see defaults. If Restore IP Factory Defaults is selected remotely, IP connectivity is lost.
Page 118: Test Ip Address Menu
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Test IP Address Menu Test IP Address Main Menu\System Management\Test IP Address\ Ping and Traceroute utilities are included on the Test IP Address menu (see testing the IP configurations.
Page 119: Time/Date Adjust Menu
Time/Date Adjust Menu Time/Date Adjust Main Menu\System Management\Time/Date Adjust\ The Time/Date Adjust menu (see time and date appear on most screens and is used for performance monitoring displays. TID: TA1248 Unacknowledged Alarms: None Figure 5-41. Time/Date Adjust Menu The Time/Date Adjust menu options are shown in Table 5-41.
Page 120: Current Baud Rate Menu
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Current Baud Rate Menu Current Baud Rate Main Menu\System Management\Current Baud Rate\ The Current Baud Rate menu (see management port baud rate is 9600 bps. TID: TA1248...
Page 121: Tftp Configuration Storage/Retrieval Screen
TFTP Configuration Storage/Retrieval Screen TFTP Configuration Storage/Retrieval Main Menu\System Management\TFTP Configuration Storage/Retrieval\ The TFTP Configuration Storage/Retrieval screen (see sioning information for the Total Access 1248 system to a remote TFTP server for possible restoration at a later time. In addition to its obvious use for fast recovery of shelf provisioning information, the TFTP Configuration Storage/Retrieval screen can be used to “clone”...
Page 122: Table 5-43. Tftp Configuration Storage/Retrieval Screen Fields
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Table 5-43. TFTP Configuration Storage/Retrieval Screen Fields Field TFTP Server TFTP Function TFTP Filename Error Status Update Progress For alternate methods to store or retrieve the Total Access 1248 System Configuration Archive (SCA) file see Configuration Storage and Retrieval”...
Page 123: Snmp/Tl1 Configuration Menu
SNMP/TL1 Configuration Menu SNMP/TL1 Configuration Main Menu\System Management\SNMP/TL1 Configuration\ The Simple Network Management Protocol (SNMP)/TL1 Configuration menu (see is used to provision contact information, community names, trap hosts, and the traps enabled option, which provide control to manage SNMP remote access to the system through inband management.
Page 124: Snmp Contact Information Menu
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice SNMP Contact Information Menu SNMP Contact Information Main Menu\System Management\SNMP/TL1 The SNMP Contact Information menu (see be customized to reflect any contact, name, and location. TID: TA1248 Unacknowledged Alarms: None 1.
Page 125: Snmp Community Names Menu
SNMP Community Names Menu SNMP Community Names Main Menu\System Management\SNMP/TL1 The SNMP Community Names menu (see accounts which specify unique IP addresses and privileges for network management. To restrict SNMP remote access to a single IP Address, assign the IP Address to a community. An IP Address of 0.0.0.0 allows access from all IP Addresses.
Page 126 Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Table 5-46. SNMP Community Names Menu Options (Continued) Option Description IP Address Privileges Name IP Address Privileges 5-74 Function This option is used to configure the second SNMP community IP address in decimal dot format (i.e.,...
Page 127: Snmp Trap Hosts Menu
SNMP Trap Hosts Menu SNMP Trap Hosts Main Menu\System Management\SNMP/TL1 The SNMP Trap Hosts Menu (see nations) and SNMP versions for notification of a trap. A trap is an automatic alert, or notifi- cation, sent to an IP Address. The Total Access 1248 system forwards SNMP traps to all configured hosts as the traps occur.
Page 128 Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Table 5-47. SNMP Trap Hosts Menu Options (Continued) Option Description Version IP Address Version Trap Port The SNMP version should match the agent used for SNMP on the network management side.
Page 129: Code Download Method Menu
Code Download Method Menu Code Download Method Main Menu\System Management\Code Download Method\ The Code Download Method menu displays two methods to download code (see TID: TA1248 Unacknowledged Alarms: None Figure 5-48. Code Download Method Menu The Code Download Method menu options are shown in Table 5-48.
Page 130: Y-Modem Menu
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice The System Management menu TFTP IP address option must be configured to use TFTP. Y-Modem Menu Y-Modem Main Menu\System Management\Code Download The Y-Modem menu (see Figure Total Access 1248 through the craft port.
Page 131: Tftp Download Screen
4. Browse to the file containing the code, select The code begins transmitting from the terminal emulation package. When the download is complete, the unit restarts automatically. If the download is cancelled due to inactivity, press the Code Download Method menu and restart the procedure. TFTP Download Screen TFTP Download Main Menu\System Management\Code Download...
Page 132: Table 5-49. Tftp Download Screen Fields
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Table 5-49. TFTP Download Screen Fields Field TFTP Server Get Code For TFTP Filename Error Status Update Progress 5-80 Description This field displays the IP address of the TFTP server. The TFTP IP address must be configured prior to attempting a TFTP download.
Page 133: Auto Upgrade Configuration (Auc) Status Menu
Auto Upgrade Configuration (AUC) Status Menu Auto Upgrade Configuration (AUC) Status Main Menu\System Management\Code Download The Auto Upgrade Configuration (AUC) Status menu (see manually or automatically upgrade the Total Access 1248 firmware. When enabled, the Auto Upgrade operation performs the following tasks: •...
Page 134: Table 5-50. Auto Upgrade Configuration (Auc) Status Menu Options
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Table 5-50. Auto Upgrade Configuration (AUC) Status Menu Options Option Description AUC Config File AUC Mode AUC Refresh Interval AUC Upgrade Retries AUC TFTP Server AUC Base Path...
Page 135: Table 5-51. Auto Upgrade Configuration (Auc) Status Menu Status Fields
Separate status information is provided for the file retrieval operation and the actual upgrade operation. The Auto Upgrade Configuration (AUC) Status menu status fields are defined in Table 5-51. Table 5-51. Auto Upgrade Configuration (AUC) Status Menu Status Fields Field Comp/Errs/Pend Last Action Status (Current or Last)
Page 136: Restore Factory Defaults Menu
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Restore Factory Defaults Menu Restore Factory Defaults Main Menu\System Management\Restore Factory Defaults\ The Restore Factory Defaults menu (see factory defaults. This action is service affecting. If the system is accessed remotely through a static IP address, the system resets and access is lost.
Page 137: Reset System Menu
Reset System Menu Reset System Main Menu\System Management\Reset System\ The Reset System menu (see This action is service affecting. If the system is accessed remotely through a static IP address, the system resets and access is lost until the system reboot is completed. When the Reset System option is selected, the system resets the host unit and all client units without additional prompting.
Page 138: Self Test Menu
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Self Test Menu Self Test Main Menu\System Management\Self Test\ If expansion mode is enabled (refer to page 5-90), the Select Shelf menu (see or client unit must be chosen in order to access the Self Test menu.
Page 139: Figure 5-55. Self Test Menu
TID: TA1248 Unacknowledged Alarms: None The Self Test menu option is shown in Option Description Run Fan Self Test 61179641AL1-5C Total Access 1248 Self Test 1. Run Fan Self Test Selection : Fan #1 Test Ready to Test Fan #2 Test Ready to Test Fan #3 Test Ready to Test...
Page 140: External Alarms Menu
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice External Alarms Menu External Alarms Main Menu\System Management\External Alarms\ The External Alarms menu (see external alarms. The alarms can be assigned unique names and an associated severity level (refer to “External Alarm Severity Menu”...
Page 141: External Alarm Severity Menu
External Alarm Severity Menu External Alarm Severity Main Menu\System Management\External The External Alarm Severity menu (see for each of the three external alarms. TID: TA1248 Unacknowledged Alarms: None Figure 5-57. External Alarm Severity Menu The External Alarm Severity menu options are shown in Table 5-57.
Page 142: Expansion Menu
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Expansion Menu Expansion Main Menu\System Management\Expansion\ The Expansion Menu (see Figure up to four Total Access 1248 units (one host and three clients). The expansion mode can only be enabled on the host units.
Page 143: Modem Configuration Menu
Modem Configuration Menu Modem Configuration Main Menu\System Management\Modem Configuration\ The Modem Configuration menu (see The V.90 modem is used for remote operation. TID: TA1248 Unacknowledged Alarms: None Figure 5-59. Modem Configuration Menu The Modem Configuration menu options are shown in Table 5-60.
Page 144: Caller Id Features Menu
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Caller ID Features Menu Caller ID Features Main Menu\System Management\Modem menu (see Caller ID Features TID: TA1248 Unacknowledged Alarms: None Figure 5-60. Caller ID Features Menu The Caller ID Features menu options are shown in Table 5-61.
Page 145: Network Port Menu
Network Port Menu Network Port Main Menu\Network Port\ The Network Port menu (see Group, and access the T1 or E1 interfaces. TID: TA1248 Unacknowledged Alarms: None The proper mode should be selected prior to configuring a T1 or E1 circuit. The Network Port menu options are shown in Table 5-62.
Page 146: T1 Main Menu
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice T1 Main Menu T1 Main Menu Main Menu\Network Port\T1 Main Menu\ From the T1 Main Menu (see mance monitoring can be viewed. TID: TA1248 Unacknowledged Alarms: None...
Page 147: Table 5-63. T1 Main Menu Options
Option Description T1 Provisioning T1 Status T1 Performance Test Restore T1 Factory Defaults SNMP/Menu Loopback Detection Inband Loopback Detection FDL Loopback Detection 61179641AL1-5C Table 5-63. T1 Main Menu Options Function This option displays the 5-96. This option displays the This option displays the 100.
Page 148: T1 Provisioning Menu
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice T1 Provisioning Menu T1 Provisioning Main Menu\Network Port\T1 Main Menu\T1 Provisioning\ The T1 Provisioning screen (see TID: TA1248 Unacknowledged Alarms: None The T1 Provisioning menu options are shown in...
Page 149: Table 5-64. T1 Provisioning Menu Options
Table 5-64. T1 Provisioning Menu Options Option Description Type Framing Line Code Line Build Out 61179641AL1-5C T1 Function This field displays the T1 circuit type. This field displays the framing setting for the T1 circuit. Settings include the following: • SF •...
Page 150: T1 Status Menu
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice T1 Status Menu T1 Status Main Menu\Network Port\T1 Main Menu\T1 Status\ The T1 Status menu (see Figure summary of the associated alarm counts. TID: TA1248 Unacknowledged Alarms: None...
Page 151: Table 5-65. T1 Status Menu Options
Table 5-65. T1 Status Menu Options Option Field Type Framing Line Code Line Build Out T1 Alarm Total Alarms Red Total Alarms Yellow Total Alarms Blue Reset Alarm Counts 61179641AL1-5C Function This field displays the T1 circuit type. This field displays the framing setting for the T1 circuit. For more information, see Table 5-64 This field displays the line code setting for the T1 circuit.
Page 152: T1 Pm Main Menu
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice T1 PM Main Menu T1 PM Main Menu\Network Port\T1 Main Menu\T1 PM\ The T1 PM Main Menu (see displays in 24-hour and 15-minute increments for the current port selected and to clear all T1 performance monitoring data.
Page 153: T1 Performance Monitoring Status Screen
T1 Performance Monitoring Status Screen T1 Performance Monitoring Status Main Menu\Network Port\T1 Main Menu\T1 The T1 Performance Monitoring Status screen (see monitoring in 24-hour and 15-minute increments for the current port selected. To display the Abbreviations screen, press “ TID: TA1248 Unacknowledged Alarms: None 24 Hr - Current...
Page 154: Table 5-68. T1 Performance Monitoring Status Screen Hot Keys
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Table 5-67. T1 Performance Monitoring Status Screen Codes (Continued) Code Definition CV-P Code Violations CV-L Code Violations ES-L Errored Seconds The T1 Performance Monitoring Status screen hot keys are defined in Table 5-68.
Page 155: T1 Test Menu
T1 Test Menu T1 Test Main Menu\Network Port\T1 Main Menu\T1 Test\ Figure 5-67 shows the T1 Test Menu. TID: TA1248 Unacknowledged Alarms: None The T1 Test Menu options are shown in Option Definition Payload Loopback Line Loopback Local Loopback No Loopback Clear T1 Loopbacks On All Ports 61179641AL1-5C...
Page 156: Restore T1 Factory Defaults Menu
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Restore T1 Factory Defaults Menu Restore T1 Factory Defaults Main Menu\Network Port\T1 Main Menu\Restore T1 Factory Defaults\ The Restore T1 Factory Defaults menu (see settings for all T1 ports.
Page 157: E1 Main Menu
E1 Main Menu E1 Main Menu Main Menu\Network Port\E1 Main Menu\ From the E1 Main Menu (see mance monitoring can be viewed. TID: TA1248 Unacknowledged Alarms: None The E1 Main Menu options are shown in Option Description E1 Provisioning E1 Status E1 Performance Test Restore E1 Factory Defaults...
Page 158: E1 Provisioning Menu
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice E1 Provisioning Menu E1 Provisioning Main Menu\Network Port\E1 Main Menu\E1 Provisioning\ The E1 Provisioning screen (see TID: TA1248 Unacknowledged Alarms: None The E1 Provisioning menu fields are shown in Table 5-72.
Page 159: E1 Status Menu
E1 Status Menu E1 Status Main Menu\Network Port\E1 Main Menu\E1 Status\ The E1 Status Menu (see Figure summary of the associated alarm counts. TID: TA1248 Unacknowledged Alarms: None Framing FAS+CRC FAS+CRC FAS+CRC FAS+CRC Line Code HDB3 E1 Alarm Total Alarms Yellow Blue 8.
Page 160: E1 Pm Main Menu
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice E1 PM Main Menu E1 PM Main Menu Main Menu\Network Port\E1 Main Menu\E1 PM Main Menu\ The E1 PM Main Menu (see displays in 24-hour and 15-minute increments for the current port selected and to clear all E1 performance monitoring data.
Page 161: E1 Performance Monitoring Status Screen
E1 Performance Monitoring Status Screen E1 Performance Monitoring Status Main Menu\Network Port\E1 Main Menu\E1 PM Main The E1 Performance Monitoring Status screen (see monitoring in 24-hour and 15-minute increments for the current port selected. To display the Abbreviations screen, press “ TID: TA1248 Unacknowledged Alarms: None 24 Hr...
Page 162: Table 5-76. E1 Performance Monitoring Status Screen Hot Keys
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Table 5-75. E1 Performance Monitoring Status Screen Codes (Continued) Code Definition CV-P Code Violations CV-L Code Violations ES-L Errored Seconds The E1 Performance Monitoring Status screen hot keys are defined in Table 5-76.
Page 163: E1 Test Menu
E1 Test Menu E1 Test Main Menu\Network Port\E1 Main Menu\E1 Test\ Figure 5-74 shows the E1 Test Menu. TID: TA1248 Unacknowledged Alarms: None The E1 Test Menu options are shown in Option Definition Payload Loopback Line Loopback Local Loopback No Loopback Clear E1 Loopbacks On All Ports 61179641AL1-5C...
Page 164: Restore E1 Factory Defaults Menu
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Restore E1 Factory Defaults Menu Restore E1 Factory Defaults Main Menu\Network Port\E1 Main Menu\Restore E1 Factory Defaults\ The Restore E1 Factory Defaults menu (see settings for all E1 ports.
Page 165: Ima Main Menu
IMA Main Menu IMA Main Menu Main Menu\Network Port\IMA Main Menu\ The Total Access 1248 system is fed by virtual circuits using IMA. The IMA Main menu (see Figure 5-76) is the central point for managing and provisioning the Total Access 1248 IMA related options.
Page 166: Ima Configuration Screen
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice IMA Configuration Screen IMA Configuration Screen Main Menu\Network Port\IMA Main Menu\IMA Configuration Screen\ The IMA Configuration screen (see Link type. This screen is informational only. TID: TA1248 Unacknowledged Alarms: None Figure 5-77.
Page 167: Ima Provisioning Menu
IMA Provisioning Menu IMA Provisioning Main Menu\Network Port\IMA Main Menu\IMA Provisioning\ The IMA Provisioning menu (see TID: TA1248 Unacknowledged Alarms: None Figure 5-78. IMA Provisioning Menu The IMA Provisioning menu options are shown in Table 5-80. IMA Provisioning Menu Options Option Description IMA Facility...
Page 168: Ima Facility Provisioning Menu
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice IMA Facility Provisioning Menu IMA Facility Provisioning Main Menu\Network Port\IMA Main Menu\IMA The IMA Facility Provisioning menu (see a per facility basis. TID: TA1248 Unacknowledged Alarms: None Figure 5-79.
Page 169: Ima All Facilities Provisioning Screen
IMA All Facilities Provisioning Screen IMA All Facilities Provisioning Main Menu\Network Port\IMA Main Menu\IMA Provisioning\IMA Facility The IMA All Facilities Provisioning screen (see facilities. TID: TA1248 Unacknowledged Alarms: None Fac1 Operation Mode IMA Grp IMA Grp IMA Grp IMA Grp RX Group RX Link ID RX ATM Address...
Page 170: Operation Mode For Facility Menu
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Operation Mode for Facility Menu Operation Mode for Facility Main Menu\Network Port\IMA Main Menu\IMA Provisioning\IMA Facility Provisioning\IMA All Facilities Mode for Facility\ The Operation Mode for Facility menu (see mode for each IMA facility.
Page 171: Ima Group Provisioning Menu
IMA Group Provisioning Menu IMA Group Provisioning Main Menu\Network Port\IMA Main Menu\IMA The IMA Group Provisioning menu (see IMA Group is a collection of physical links bundled together. The IMA Group must be Out of Service-Unassigned in order to change the provisioning options. TID: TA1248 Unacknowledged Alarms: None Figure 5-82.
Page 172 Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Table 5-84. IMA Group Provisioning Menu Options (Continued) Option Description IMA Transmit ID IMA TX Frame Length Min. TX Active Links Min. RX Active Links Max. Link Diff. Delay...
Page 173: Ima Shortcut Setup Menu
IMA Shortcut Setup Menu IMA Shortcut Setup Main Menu\Network Port\IMA Main Menu\IMA The IMA Shortcut Setup menu (see all of the IMA links simultaneously. To provision IMA links individually, refer to Provisioning Menu” on page 5-116. TID: TA1248 Unacknowledged Alarms: None Figure 5-83.
Page 174: Ima Scrambler Menu
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice IMA Scrambler Menu IMA Scrambler Main Menu\Network Port\IMA Main Menu\IMA The IMA Scrambler menu (see bling is designed to randomize the pattern of 1s and 0s carried in ATM cells. Randomizing the digital bits can prevent continuous, non-variable bit patterns (i.e., long strings of all 1s or all...
Page 175: Restore Ima Factory Defaults Menu
Restore IMA Factory Defaults Menu Restore IMA Factory Defaults Main Menu\Network Port\IMA Main Menu\IMA The Restore IMA Factory Defaults menu (see settings to factory defaults. Depending on the system settings, this action can be service affect- ing. If the system is accessed remotely through a static IP address, the system resets and access is lost.
Page 176: Status/Failure Monitoring Menu
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Status/Failure Monitoring Menu Status/Failure Monitoring Main Menu\Network Port\IMA Main Menu\Status/Failure Monitoring\ The Total Access 1248 system tracks Failure Monitoring (FM) for the IMA group and each of the links.
Page 177: Ima Group 1 Failure Monitoring Status Screen
IMA Group 1 Failure Monitoring Status Screen IMA Group 1 Failure Monitoring Status Main Menu\Network Port\IMA Main Menu\Status/Failure The IMA Group 1 Failure Monitoring Status screen (see group state and the Near End and TID: TA1248 Unacknowledged Alarms: None Figure 5-87. IMA Group 1 Failure Monitoring Status Screen The IMA Group 1 Failure Monitoring Status screen fields are shown in Table 5-89.
Page 178 Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Table 5-89. IMA Group 1 Failure Monitoring Status Screen Fields (Continued) Field Active Rx Links FE Failure Data FE Frame Length Group Version Timing Source Last Timing Source Change...
Page 179: Ima Link Failure Monitoring Status Screen
IMA Link Failure Monitoring Status Screen IMA Link Failure Monitoring Status Main Menu\Network Port\IMA Main Menu\Status/Failure The IMA Link Failure Monitoring Status screen (see the facilities. TID: TA1248 Unacknowledged Alarms: None Fac1 NE Tx State: Active NE Rx State: Active FE Tx State: Active FE Rx State:...
Page 180 Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Table 5-90. IMA Link Failure Monitoring Status Screen States and Failure Conditions (Continued) State Definition Usable Usable Active Active Near End Rx States NotInGr Not In Group, Unassigned...
Page 181 Table 5-90. IMA Link Failure Monitoring Status Screen States and Failure Conditions (Continued) State Definition Deleted Not In Group, Deleted Fault Unusable, Fault Misconn Unusable, Mis-connected Inhibit Unusable, Inhibited Usable Usable Active Active Far End Rx States NotInGr Not In Group, Unassigned Deleted Not In Group, Deleted Failed...
Page 182 Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Table 5-90. IMA Link Failure Monitoring Status Screen States and Failure Conditions (Continued) State Definition Usable Usable Active Active Near End and Far End Rx Failure...
Page 183: Ima Loopback Menu
IMA Loopback Menu IMA Loopback Main Menu\Network Port\IMA Main Menu\IMA Loopback\ The IMA Loopback menu (see group. Each IMA Loopback menu option can be enabled or disabled. TID: TA1248 Unacknowledged Alarms: None The IMA Loopback menu options are shown in Table 5-91.
Page 184: Ima Performance Monitoring Menu
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice IMA Performance Monitoring Menu IMA Performance Monitoring Main Menu\Network Port\IMA Main Menu\IMA Performance Monitoring\ The IMA Performance Monitoring menu (see 1248 system performance statistics for the IMA groups.
Page 185: Ima Group 1 Performance Monitoring Status Screen
IMA Group 1 Performance Monitoring Status Screen IMA Group 1 Performance Monitoring Status Main Menu\Network Port\IMA Main Menu\IMA Performance The IMA Group 1 Performance Monitoring Status screen displays IMA group performance monitoring statistics in 24-hour and 15-minute increments, as shown in The IMA Group 1 Performance Monitoring Status screen can be cleared by selecting prompting.
Page 186: Table 5-94. Ima Group 1 Performance Monitoring Status Screen Hot Keys
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice The IMA Group 1 Performance Monitoring Status screen hot keys are defined in Table 5-94. IMA Group 1 Performance Monitoring Status Screen Hot Keys Hot Key...
Page 187: Ima Performance Monitoring Status Facility 1 Near End Pm Data Screen
IMA Performance Monitoring Status Facility 1 Near End PM Data Screen IMA Performance Monitoring Status Facility 1 Near End PM Data Main Menu\Network Port\IMA Main Menu\IMA Performance Data\ The IMA Performance Monitoring Status Facility 1 Near End PM Data screen displays IMA performance monitoring for IMA facilities in 24-hour and 15-minute increments, as shown in Figure 5-92.
Page 188: Table 5-96. Ima Performance Monitoring Status Hot Keys
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Table 5-96. IMA Performance Monitoring Status Hot Keys Hot Key Description Backward (2hrs/15min PM) Clear PM Stats Forward (2hrs/15min PM) Previous Port Next Port Select Port...
Page 189: T1/E1 Menu
T1/E1 Menu T1/E1 Menu Main Menu\Network Port\T1/E1 Menu\ The T1/E1 menu (see Figure TID: TA1248 Unacknowledged Alarms: None 61179641AL1-5C 5-93) is used to specify either a T1 or E1 interface. Total Access 1248 T1/E1 1. T1 2. E1 Selection : '?' - System Help Screen Figure 5-93.
Page 190: Dsl Menus
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice DSL Menus DSL Menus Main Menu\DSL Menus\ Each of the 48 DSL lines has a number of settings that can be provisioned. These settings affect the performance of the line. The class of service to be provisioned on the line and the type of modem at the distant end must be considered.
Page 191: Dsl Provisioning Menu
DSL Provisioning Menu DSL Provisioning Main Menu\DSL Menus\DSL Provisioning\ The DSL Provisioning menu (see and restore the ADSL provisioning information. TID: TA1248 Unacknowledged Alarms: None Figure 5-95. DSL Provisioning Menu The DSL Provisioning menu options are as shown in Table 5-98. DSL Provisioning Menu Options Option Description DSL Profiles...
Page 192: Adsl Profiles Menu
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice ADSL Profiles Menu ADSL Profiles Main Menu\DSL Menus\DSL Provisioning\ADSL Profiles\ The ADSL Profiles menu (see the same time. At initial setup, all lines are set to the default values using the “DEFVAL”...
Page 193: Figure 5-97. Edit Adsl Profile Menu
Figure 5-97 displays an example of the Edit ADSL Profiles menu. See 141 for details on ADSL line options. The Custom Name reference indicates the user assigned profile name. TID: TA1248 Unacknowledged Alarms: None Profile Settings for: 1. State: Inactive 2.
Page 194 Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Table 5-100. Edit ADSL Profile Menu Options (Continued) Option Description Client 3 Rate Mode Line Type Downstream Options Target SNR Margin Max SNR Margin Min SNR...
Page 195 Table 5-100. Edit ADSL Profile Menu Options (Continued) Option Description Upstream Options Target SNR Margin Max SNR Margin Min SNR Margin Fast Channel Max Tx Rate Fast Channel Tx Rate Interleave Channel Max Tx Rate Interleave Channel Min Tx Rate Interleave Channel Max Delay...
Page 196: Alarm Profiles Menu
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Alarm Profiles Menu Alarm Profiles Main Menu\DSL Menus\DSL Provisioning\Alarm Profiles\ Alarm options for the DSL lines are completed by setting up profiles using the Alarm Profiles...
Page 197: Figure 5-99. Profile Settings For: Custom Name Menu
TID: TA1248 Unacknowledged Alarms: None Profile Settings for: 1. State: Inactive 2. Host : None 3. Client 1 : (Not Present) None 4. Client 2 : (Not Present) None 5. Client 3 : (Not Present) None Downstream 6. LOS Secs 7.
Page 198 Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Table 5-101. Profile Settings for: Custom Name Menu Options (Continued) Option Description LOS Secs (Upstream) ES Secs (Upstream) 5-146 Function The Loss of Signal Seconds (LOS Secs) option is used to configure upstream traffic.
Page 199: Port Provisioning Menu
Port Provisioning Menu Port Provisioning Main Menu\DSL Menus\DSL Provisioning\Port Provisioning\ If expansion mode is enabled (refer to page 5-90), the Select Shelf menu (see host or client unit must be chosen in order to access the Port Provisioning menu. TID: TA1248 Unacknowledged Alarms: None The Port Provisioning menu (see 61179641AL1-5C...
Page 200: Figure 5-101. Port Provisioning Menu
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice TID: TA1248 Unacknowledged Alarms: None Figure 5-101. Port Provisioning Menu The Port Provisioning options are as shown in Table 5-102. Port Provisioning Menu Options Option Description...
Page 201: Service State For Adsl Card Menu
for next port or provisioned. Service State for ADSL Card Menu Service State for ADSL Card Main Menu\DSL Menus\DSL Provisioning\Port The ADSL Card Service State option on the for ADSL Card menu, which refers to the ADSL card that is located on the main circuit board of the Total Access 1248 system.
Page 202: Service Mode For Port: # Menu
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Service Mode for Port: # Menu Service Mode for Port: # Main Menu\DSL Menus\DSL Provisioning\Port The Service Mode option on the menu. The # represents the value displayed for the Select Port option. The service mode refers to the data mode for the traffic between the DSLAM and the modem.
Page 203: Cabinet Mode For Port: # Menu
Table 5-106. Hamband Mask for Port: # Menu Options Option Description Enabled Disabled Cabinet Mode for Port: # Menu Cabinet Mode for Port: # Main Menu\DSL Menus\DSL Provisioning\Port The Cabinet Mode option on the menu (see Figure 5-102). The # represents the value displayed for the Select Port option. This option permits the ADSL2+ line to only use downstream tones beginning at Tone 110, 130, and 250.
Page 204: Link Down Alarm For Port: # Menu
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Link Down Alarm for Port: # Menu Link Down Alarm for Port: # Main Menu\DSL Menus\DSL Provisioning\Port The Link Down Alarm option on the Port: # menu. The # represents the value displayed for the Select Port option. The Link Down Alarm option is used to enable and disable link down alarms.
Page 205: Adsl Restore Menu
ADSL Restore Menu ADSL Restore Menu Main Menu\DSL Menus\DSL Provisioning\ADSL Restore Menu\ The ADSL Restore menu (see or select the DSP Management menu. TID: TA1248 Unacknowledged Alarms: None The ADSL Restore Menu options are shown in Table 5-109. ADSL Restore Menu Options Option Description ADSL Provisioning Restore...
Page 206: Dsp Management Menu
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice DSP Management Menu DSP Management Menu Main Menu\DSL Menus\DSL Provisioning\ADSL Restore If expansion mode is enabled (refer to page 5-90), the Select Shelf menu (see host or client unit must be chosen in order to access the DSP Management menu.
Page 207: Figure 5-105. Dsp Management Menu
TID: TA1248 Unacknowledged Alarms: None Figure 5-105. DSP Management Menu The DSP Management menu options are shown in Table 5-110. DSP Management Menu Options Option Description Reset All DSPs and reload firmware Reset DSPs without reloading firmware Auto Warm Start Retrain Criteria Exit 61179641AL1-5C...
Page 208: Reset Dsp Menu
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Reset DSP Menu Reset DSP Main Menu\DSL Menus\DSL Provisioning\ADSL Restore Menu\DSP Management The Reset DSP Menu (see Figure eight ports as listed in the menu commentary when a DSP is selected.
Page 209: Adsl Retrain Criteria Menu
ADSL Retrain Criteria Menu ADSL Retrain Criteria Main Menu\DSL Menus\DSL Provisioning\ADSL Restore Menu\DSP Management The ADSL Retrain Criteria menu (see force a retrain. A comprehensive count of retrains incurred and the error conditions that caused them is also provided. TID: TA1248 Unacknowledged Alarms: None Retrained due to: SES NE: 'S' - Select Port...
Page 210: Table 5-113. Adsl Retrain Criteria Menu Hot Keys
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Table 5-112. ADSL Retrain Criteria Menu Options (Continued) Option Description Retrain UAS-LNE Retrain UAS-LFE Retrain SES-FE The ADSL Retrain Criteria menu hot keys are defined in Table 5-113.
Page 211: Status Menu
Status Menu Status Main Menu\DSL Menus\Status\ If expansion mode is enabled (refer to page 5-90), the Select Shelf menu (see host or client unit must be chosen in order to access the Status menu. TID: TA1248 Unacknowledged Alarms: None The Status menu (see Figure 61179641AL1-5C NOTE...
Page 212: Figure 5-109. Status Menu
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice TID: TA1248 Unacknowledged Alarms: None The Status menu options are as shown in Option Description ADSL Status All ADSL Ports Status ATU-R Information BAT/SNR Tables 5-160...
Page 213: Adsl Status Screen
ADSL Status Screen ADSL Status Main Menu\DSL Menus\Status\ADSL Status\ An example of the report returned from selecting the ADSL Status option is shown in Figure 5-110. TID: TA1248 Unacknowledged Alarms: None Link Status Rate Mode Line Type Line Rate Margin Power Attenuation Max Rate...
Page 214: Adsl Ports Status Screen
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice ADSL Ports Status Screen ADSL Ports Status Main Menu\DSL Menus\Status\ADSL Ports Status\ An example of the report returned from selecting the ALL ADSL Ports Status option is shown Figure 5-111.
Page 215: Atu-R Information
ATU-R Information ATU-R Information Main Menu\DSL Menus\Status\ATU-R Information\ The ATU-R Information screen (see the circuit. If the line is trained up in T1.413 mode, the screen shows a Vendor ID for the customer’s modem, and the The Provider Code is blank. If the line is trained up in G.dmt mode, the Vendor ID is blank and the Provider Code for the customer’s modem is shown.
Page 216: Bit Allocation Table - Link Up Screen
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Bit Allocation Table - Link Up Screen Bit Allocation Table - Link Up Screen Main Menu\DSL Menus\Status\Bit Allocation Table - Link Up Screen\ The Bit Allocation Table - Link Up screen (see each of the tones in the ADSL signal.
Page 217: Figure 5-114. Alternate View Of The Bit Allocation Table Screen
TID: TA1248 Unacknowledged Alarms: None <- B - Backward ------------------------------------------------------------ 20| 12 12 12 10 11 11 11 10 60| 11 11 11 11 80| 12 11 12 11 12 11 11 12 11 11 11 11 11 11 11 100| 12 12 11 12 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 120| 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 140| 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11...
Page 218: Performance Menu
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Performance Menu Performance Menu Main Menu\DSL Menus\Performance Menu\ If expansion mode is enabled (refer to page 5-90), the Select Shelf menu (see host or client unit must be chosen in order to access the Performance menu.
Page 219: Figure 5-117. Performance Menu
TID: TA1248 Unacknowledged Alarms: None An example of the ADSL Performance Monitoring Status screen is shown in TID: TA1248 Unacknowledged Alarms: None ADSL Performance Monitoring Status - ADSL Port 1 24 Hr - Current MM/DD 15 Min - Current 16:30 16:15 16:00 15:45...
Page 220: Table 5-115. Performance Monitoring Status Screen Fields
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Table 5-115. Performance Monitoring Status Screen Fields Field The Performance Monitoring Status screen hot keys are defined in Table 5-116. Performance Monitoring Status Screen Hot Keys...
Page 221: Adsl Delt Menus
ADSL DELT Menus ADSL DELT Menus Main Menu\DSL Menus\ADSL DELT Menus\ If expansion mode is enabled (refer to page 5-90), the Select Shelf menu (see host or client unit must be chosen in order to access the Performance menu. TID: TA1248 Unacknowledged Alarms: None The ADSL DELT menus (see (DELT).
Page 222: Figure 5-120. Adsl Delt Menu
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice TID: TA1248 Unacknowledged Alarms: None Current ADSL ServiceMode/Port Status =ADSL1 DELT Functionality requires a service mode that supports DELT on both units 1. Port 2. Activate DELT 3.
Page 223: System Alarm Log Screen
System Alarm Log Screen System Alarm Log Main Menu\System Alarm Log\ The Total Access 1248 system provides a system alarm log for monitoring alarms. To view the System Alarm Log screen (see press NTER TID: TA1248 Unacknowledged Alarms: None System Alarm Log Date Time MM/DD/YY 16:25:43 Minor...
Page 224: System Event Log Screen
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice System Event Log Screen System Event Log Main Menu\System Event Log\ The System Event Log screen (see events. TID: TA1248 Unacknowledged Alarms: None System Event Log...
Page 225: Table 5-119. System Event Log Hot Keys
Table 5-119. System Event Log Hot Keys Hot Key Description Date/Time First Login Last Next Account Previous S/W Updates Time Ascending View Security 61179641AL1-5C Function This hot key is used to display all events. This hot key is used to display date/time events. This hot key is used to display the first page of events.
Page 226: Contact Information Screen
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Contact Information Screen Contact Information Main Menu\Contact Information\ The Contact Information screen (see repair, and online support contact information. TID: TA1248 Unacknowledged Alarms: None Figure 5-123. Contact Information Screen...
Page 227: Tl1 Mode Screen
TL1 Mode Screen TL1 Mode Main Menu\TL1 Mode\ Figure 5-124 displays the TL1 session screen. TL1 commands can be executed once the session has been activated with a proper login. All commands end with a semicolon. Type 'menus;' to return to the menu session. /*Type 'MENUS;' to enter MENU Session*/ OK 0 <...
Page 228: Table 5-120. Tl1 Commands
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice ACT-PROFILE-ADSL ACT-USER ALW-MSG-ADSL ALW-MSG-T1 ALW-MSG-EQPT ALW-MSG-ENV ALW-MSG-ALL CANC-USER DLT-ADSL DLT-CRS-VC DLT-PROFILE-ADSL DLT-PROFILE-TRAFDSC DLT-VCL DNLD-SFWR-IM ED-ADSL ED-PROFILE-ADSLDN ED-PROFILE-ADSLUP ED-PROV-TFTP ED-SECU-USER ED-T1 ENT-ADSL ENT-CRS-VC ENT-IPPORT ENT-PROFILE-ADSL ENT-PROFILE-TRAFDSC 5-176 Table 5-120.
Page 229: Maintenance
INTRODUCTION The Total Access 1248 does not require routine maintenance for normal operation. ADTRAN does not recommend that repairs be attempted in the field. Repair services can be obtained by returning the defective unit to ADTRAN. For more troubleshooting information, refer to the Total Access 1100/1200 Series Troubleshooting Guide (P/N 61179741L1-44).
Page 230: Fan Filters
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice To remove a fan module, perform the following steps: 1. Loosen the screw that holds the fan module in place. 2. Remove the fan module by pulling it straight out of the chassis.
Page 231: Tl1
When accessing the Total Access 1248 via TL1, the Save and Restore commands are used to save or retrieve the SCA file. Save Use: ED-PROV-TFTP:::::FILENAME=<filename>,TFTPIPADDR=<ip_addr>,SET; Restore Use: ED-PROV-TFTP:::::FILENAME=<filename>,TFTPIPADDR=<ip_addr>,GET; TL1 commands are also executable from the Total Access 1248 Main Menu. For more information, refer to page 5-175.
Page 232 Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice This page is intentionally blank. 61179641AL1-5C...
Page 233: Specifications
INTRODUCTION Specifications for the Total Access 1248 are detailed in Table 7-1. Total Access 1248 Specifications Specifications Number of Pairs (ADSL + POTS): Downstream Data Rate: Upstream Data Rate: ADSL Service Range: Operating Voltage Range: Nominal Operating Voltage: 61179641AL1-5C Section 7 Specifications Table ADSL Loop Interface...
Page 234 Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice Table 7-1. Total Access 1248 Specifications (Continued) Specifications Total Access 1248 48-Port Quad T1 IMA DSLAM with Internal Modem: Replacement Filter Pack (Quantity 20): Note: Current draw calculated with 8 kft copper line and maximum data rate of 8160 kbps in G.DMT mode with four cooling fans active (0.021 amps/fan).
Page 235: Warranty
Appendix A Warranty WARRANTY AND CUSTOMER SERVICE ADTRAN will replace or repair this product within the warranty period if it does not meet its published specifications or fails while in service. Warranty information can be found at www.adtran.com/warranty. Refer to the following subsections for sales, support, Customer and Product Service (CAPS) requests, or further information.
Page 236 ® Carrier Networks Division 901 Explorer Blvd. Huntsville, AL 35806...

This manual is also suitable for:

Total access 1248 quad t1 ima

ADTRAN Quad T1 IMA Installation And Maintenance Practice

Section 1

Introduction

General

Description

Section 2

Application Guidelines

Introduction

Expansion

Section 3

Installation

Introduction

Installation Prerequisites

Installation Steps

Total Access 1200F Conversion

Quick Turn-Up Steps

Section 4

Provisioning Defaults

Introduction

Section 5

User Interface

Introduction

System Management

Logging on to the Total Access 1248

Menu Structure

Menu Navigation

Menu Tree

Menu Descriptions

Quick Links

Related Manuals for ADTRAN Quad T1 IMA

Summary of Contents for ADTRAN Quad T1 IMA