Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice
ATM OAM Settings Menu
ATM OAM Settings
Main Menu\ATM Circuit
Management\ATM OAM Settings\
The ATM OAM Settings menu (see
OAM settings and to test the Inband channel PVC for an ATM fed system.
TID: TA1248
Unacknowledged Alarms: None
1. DSLAM OAM Loopback Location ID :
2. DSLAM OAM State
3. Inband OAM Loopback Test
The ATM OAM Settings menu options are shown in
Option
Description
1
DSLAM OAM Loopback
Location ID
2
DSLAM OAM State
3
Inband OAM Loopback Test
5-44
Figure
ATM OAM Settings
Selection :
'?' - System Help Screen
Figure 5-26. ATM OAM Settings Menu
Table 5-25. ATM OAM Settings Menu Options
Function
This is option is used to enter the loopback location ID
for the Total Access 1248. The remote loopback location
ID is in hexadecimal 16 byte format.
This option is used to toggle the Total Access 1248 OAM
state between Disabled and Enabled.
This option displays the
Menu"
5-26) is used to provision the Total Access 1248
Total Access 1248
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
:
Disabled
Table
5-25.
on page 5-45.
"Inband OAM Loopback Test
61179641AL1-5C