Table of Contents
Advertisement
Auto Upgrade Configuration (AUC) Status Menu
Auto Upgrade Configuration (AUC) Status
Main Menu\System Management\Code Download
The Auto Upgrade Configuration (AUC) Status menu (see
manually or automatically upgrade the Total Access 1248 firmware. When enabled, the Auto
Upgrade operation performs the following tasks:
• reads the AUC Configuration file from the designated AUC TFTP server
• validates the file
• upgrades the parameters that need to be updated
• updates the unit with new firmware as required
• reboots the unit if new firmware has been downloaded
All required parameter changes will occur first, followed by the checking of each unit for a
required upgrade.
TID: TA1248
Unacknowledged Alarms: None
AUC File
Host
C - Clear AUC Status
Figure 5-51. Auto Upgrade Configuration (AUC) Status Menu
The Auto Upgrade Configuration (AUC) Status menu options are shown in
61179641AL1-5C
Method\Auto Upgrade Configuration (AUC) Status\
Auto Upgrade Configuration (AUC) Status
1. AUC Config File
2. AUC Mode
3. AUC Refresh Interval 5
4. AUC Upgrade Retries
5. AUC TFTP Server
6. AUC Base Path
Selection :
Comp/Errs/Pend Last Action
2/
1
MM/DD/YY HH:MM:SS/AUC parsing complete
2/
0/No
MM/DD/YY HH:MM:SS/Update Complete on Host
R - Read AUC File
'?' - System Help Screen
Figure
Total Access 1248
1248.auc
Manual
hour(s)
3
192.168.1.105
/ Status (Current or Last)
S - Start Upgrade Process
Menu Descriptions
5-51) provides methods to
Table
5-50.
5-81
Advertisement
Table of Contents
