Table of Contents
Advertisement
Use
N
provisioned.
Service State for ADSL Card Menu
Service State for ADSL Card
Main Menu\DSL Menus\DSL Provisioning\Port
The ADSL Card Service State option on the
for ADSL Card menu, which refers to the ADSL card that is located on the main circuit board
of the Total Access 1248 system.
The Service State for ADSL Card menu options are shown in
Table 5-103. Service State for ADSL Card Menu Options
Option
Description
1
In Service
2
Out of Service-Unassigned
3
Out of Service-Maintenance
Service State for Port: # Menu
Service State for Port: #
Main Menu\DSL Menus\DSL Provisioning\Port
The Line Service State option on the
# menu. The # represents the value displayed for the Select Port option. The default value for
the Line Service State is Out of Service-Maintenance.
The Service State for Port: # menu options are shown in
Table 5-104. Service State for Port: # Menu Options
Option
Description
1
In Service
2
Out of Service-Unassigned
3
Out of Service-Maintenance
61179641AL1-5C
for next port or
for previous port to select the port to be
P
Provisioning\Service State for ADSL Card\
Provisioning\Service State for Port: #\
Port Provisioning Menu
NOTE
Port Provisioning Menu
Table
Function
This setting indicates that ADSL services are available, if
installed, and Link Down and Threshold alarms are
reported, if enabled.
This setting indicates that no ADSL services are
available and Link Down and Threshold alarms are not
reported.
This setting indicates that ADSL services are available
and Link Down and Threshold alarms are not reported.
displays the Service State for Port
Table
Function
This setting indicates that an ADSL modem is allowed to
train up and alarms are reported, if enabled.
This setting indicates that an ADSL modem is not
allowed to train up and alarms are not reported.
This setting indicates that an ADSL modem is allowed to
train up and alarms are not reported.
Menu Descriptions
displays the Service State
5-103.
5-104.
5-149
Advertisement
Table of Contents
Need help?
Do you have a question about the Quad T1 IMA and is the answer not in the manual?
Questions and answers