Logging On To The Total Access 1248; Figure 5-2. Login Screen - ADTRAN Quad T1 IMA Installation And Maintenance Practice

LOGGING ON TO THE TOTAL ACCESS 1248

To logon to the Total Access 1248 system, perform the following steps:
1. Establish the physical connection to the Total Access 1248.
2. If a craft port session is being used, proceed to step 3. If using a Telnet session proceed to
step 4.
3. Press until the Login prompt appears.
C +R
TRL
The Login screen displays (see
The Total Access 1248 system requires the username and
associated password.
4. Enter the default username, "ADMIN" (or the configured username with System Adminis-
trator privileges), and press
5. Enter the default password, "PASSWORD" (or the configured password), and press
The username and password fields are case sensitive. The default
values are all uppercase. For more information, refer to
Control Menu"
61179641AL1-5C
Figure 5-2).
Total Access 1248
Login: ADMIN
Password: ********

Figure 5-2. Login Screen

NOTE
.
E
NTER
NOTE
on page 5-49.
Logging on to the Total Access 1248
"Password
E .
NTER
5-3