IMA Shortcut Setup Menu
IMA Shortcut Setup
Main Menu\Network Port\IMA Main Menu\IMA
The IMA Shortcut Setup menu (see
all of the IMA links simultaneously. To provision IMA links individually, refer to
Provisioning Menu"
TID: TA1248
Unacknowledged Alarms: None
The IMA Shortcut Setup menu options are shown in
Option
Description
1
Force All Facilities Into
Unassigned
2
Force Facility - 1 Into Pass
Through
3
Force All Facilities Into IMA
Group 1
61179641AL1-5C
Provisioning\IMA Shortcut Setup\
Figure
on page 5-116.
IMA Shortcut Setup
1. Force All Facilities Into Unassigned
2. Force Facility - 1 Into Pass Through
3. Force All Facilities Into IMA Group 1
Selection :
'?' - System Help Screen
Figure 5-83. IMA Shortcut Setup Menu
Table 5-85. IMA Shortcut Setup Menu Options
5-83) provides shortcuts to facilitate provisioning
Total Access 1248
Table
5-85.
Function
This option forces all facilities to be set to the Out of
Service-Unassigned state. The T1s cannot link up to the
network.
This option forces Facility #1 to Pass Through and forces
all other Facilities to Out of Service-Unassigned. This
option is used to allow ATM transport over a single
facility (#1) without the IMA layer.
This option forces all traffic to go through IMA Group 1
and all four IMA links to train up to the upstream device.
Menu Descriptions
"IMA Facility
MM/DD/YY
HH:MM
5-121