Table of Contents
Advertisement
SNMP Trap Community
This community name is used for all SNMP traps forwarded by the
ESU 120e. Traps received from daisy chained units have a period
and the unit ID appended to the trap community name.
Host 1 Trap IP Address
The first of four entries for SNMP trap destination addresses. The
ESU 120e forwards all SNMP traps to the IP address specified in
this entry. If the address is set to the default value of 0.0.0.0, no
traps are forwarded for this particular value.
Host 2 Trap IP Address
Defaults to 0.0.0.0. Second destination address for SNMP traps.
Host 3 Trap IP Address
Defaults to 0.0.0.0. Third destination address for SNMP traps.
Host 4 Trap IP Address
Defaults to 0.0.0.0. Fourth destination address for SNMP traps.
System Name
A text string that can uniquely identify an SNMP managed node.
System Contact
A text string containing the name, phone number, etc. of the indi-
vidual responsible for maintaining an SNMP managed node.
System Location
A text string describing the physical location of an SNMP managed
node (for example, SECOND FLOOR PBX ROOM).
61200420L1-1
ESU 120e User Manual
Chapter 8. Telnet/Terminal Menus
8-5
Advertisement
Table of Contents
