SNMP Community Names Menu
SNMP Community Names
Main Menu\System Management\SNMP/TL1
The SNMP Community Names menu (see
accounts which specify unique IP addresses and privileges for network management. To
restrict SNMP remote access to a single IP Address, assign the IP Address to a community. An
IP Address of 0.0.0.0 allows access from all IP Addresses.
TID: TA1248
Unacknowledged Alarms: None
1. Name
4. Name
7. Name
The SNMP Community Names menu options are shown in
Table 5-46. SNMP Community Names Menu Options
Option
Description
1
Name
2
IP Address
3
Privileges
4
Name
61179641AL1-5C
Configuration\SNMP Community Names\
Total Access 1248
SNMP Community Names
Set Name to 0 to delete Community
private
2. IP Address
0.0.0.0
3. Privileges
Read/Write
public
5. IP Address
0.0.0.0
6. Privileges
Read
Not Configured
8. IP Address
0.0.0.0
9. Privileges
Selection :
'?' - System Help Screen
Figure 5-46. SNMP Community Names Menu
Figure
5-46) is used to establish up to three named
Table
Function
This option is used to configure the first SNMP
community. Settings include private and public.
This option is used to configure the first SNMP
community IP address in decimal dot format (i.e.,
###.###.###.###).
This option is used to configure the first SNMP
community privilege level. Options include Read/Write
and Read.
This option is used to configure the second SNMP
community. Settings include private and public.
Menu Descriptions
5-46.
5-73
Need help?
Do you have a question about the Quad T1 IMA and is the answer not in the manual?