Table of Contents
Advertisement
Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice
Modify an Existing PVC/PVP Screen
Modify Existing PVC/PVP
Main Menu\ATM Circuit Management\PVC/PVP
The Modify an Existing PVC/PVP screen (see
PVPs.
NOTE: No changes will take effect until an action is selected and executed.
To Select an action, place the cursor over the Action option and press the
Enter a VPI value between 0 and 4095.
The Modify an Existing PVC/PVP screen fields are shown in
Table 5-9. Modify an Existing PVC/PVP Screen Fields
Field
Endpoint 1 Port
Endpoint 1 VPI
Endpoint 1 VCI
Endpoint 2 Port
Endpoint 2 VPI
Endpoint 2 VCI
5-24
Management\Modify Existing PVC/PVP\
Modify an Existing PVC/PVP
Endpoint 1 (Net --> Cust)
Port
VPI
VCI
Netw
35
1000
____________________________________________________________
Service
Pkt Discard
UBR
Enabled
Circuit ID
N/A
____________________________________________________________
When finished, place cursor here to select action:
Modify existing circuit and return to PVC/PVP Management
Space Bar. To execute the action, press Enter.
Figure 5-14. Modify an Existing PVC/PVP Screen
Description
This field displays the network port.
This field displays the Virtual Path Identifier for the ATM port
from the Network. Valid values range from 0 to 4095.
This field displays the Virtual Channel Identifier for the ATM
port from the network. Valid values range from 0 to 65535.
This field displays the ATM port that is being created. Valid
values range from 1 to 48.
This field displays the Virtual Path Identifier for the ATM port.
Valid values range from 0 to 4095.
This field displays the Virtual Channel Identifier for the ATM.
Valid values range from 0 to 65535.
Figure
5-14) is used to modify existing PVC/
Endpoint 2 (Net <-- Cust)
Port
VPI
VCI
1
0
35
PCR
Best Effort
Table
5-9.
61179641AL1-5C
Advertisement
Table of Contents
