Inband Oam Loopback Test Menu; Figure 5-27. Inband Oam Loopback Test Menu; Table 5-26. Inband Oam Loopback Test Menu Options - ADTRAN Quad T1 IMA Installation And Maintenance Practice

Inband OAM Loopback Test Menu

Inband OAM Loopback Test
Main Menu\ATM Circuit Management\ATM OAM
The Inband OAM Loopback Test menu (see
1248 OAM Loopback settings and to test the Inband channel PVC for an ATM fed box.
TID: TA1248
Unacknowledged Alarms: None
1. Remote OAM Loopback Location ID : FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
2. Type of OAM Loopback Cell
3. Send Loopback Cell
4. Reset Loopback Statistics
5. Reset All Statistics
The Inband OAM Loopback Test menu options are shown in

Table 5-26. Inband OAM Loopback Test Menu Options

Option Description
1 Remote OAM Loopback
Location ID
2 Type of OAM Loopback Cell
3 Send Loopback Cell
4 Reset Loopback Statistics
5 Reset All Statistics
61179641AL1-5C
Settings\Inband OAM Loopback Test\
Inband OAM Loopback Test
Port VPI VCI
0 0 32
Tx Loopback Request
Rx Loopback Request
Tx Loopback Response
Rx Loopback Response
Loopback Passed
Loopback Failed
Selection :
'?' - System Help Screen

Figure 5-27. Inband OAM Loopback Test Menu

Figure 5-27) is used to provision the Total Access
Total Access 1248
: 0 Rx OAM Cells : 0
: 0 AIS State
: 0 RDI State
: 0
: 0
: 0
: Segment
Function
This is option is used to enter the remote loopback
location ID. The remote loopback location ID is in
hexadecimal 16 byte format.
This option is used to specify the type of OAM Loopback
cell. Options include the following:
• Segment
• End-to-End
This option is used to send a loopback cell.
This option clears the OAM loopback statistics for this
circuit.
This option clears all OAM loopback statistics.
Menu Descriptions
: FALSE
: FALSE
Table 5-26.
5-45