Caller Id Features Menu; Figure 5-60. Caller Id Features Menu; Table 5-61. Caller Id Features Menu Options - ADTRAN Quad T1 IMA Installation And Maintenance Practice

Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice

Caller ID Features Menu

Caller ID Features
Main Menu\System Management\Modem
The
Caller ID Features
TID: TA1248
Unacknowledged Alarms: None
The Caller ID Features menu options are shown in
Option Description
1 Caller ID
2 Reject Calls with no Caller ID
3 Only Allow Specified Phone
Numbers
4 Phone Numbers
5-92
Configuration\Caller ID Features\
menu (see Figure 5-60) is used to provision the caller ID options.
Caller ID Features
1. Caller ID
2. Reject Calls with no Caller ID
3. Only Allow Specified Phone Numbers
4. Phone Numbers
Selection :
'?' - System Help Screen

Figure 5-60. Caller ID Features Menu

Table 5-61. Caller ID Features Menu Options

Function
This option is used to enable or disable the Caller ID
option.
This option is used to reject call that do not contain a
Caller ID. The Caller ID option above must be enabled
for this option to be enabled.
This option is used to specify if the system accepts a call
from any phone number or only specified numbers.
This option is used to enter one or two phone numbers
that the system validates before establishing a
connection.
Total Access 1248
Disabled
No
No
Table 5-61.
MM/DD/YY HH:MM
61179641AL1-5C