Snmp Trap Community - ADTRAN TSU 100 User Manual

Chapter 8. Telnet/Terminal Menus

SNMP Trap Community

This community name is used for all SNMP traps forwarded by
the TSU 100. Traps received from daisy-chained units have a
period and the Unit ID appended to the trap community name.
Host 1 Trap IP Address
The first of four entries for SNMP trap destination addresses.
The TSU 100 forwards all SNMP traps to the IP address speci-
fied in this entry. If the address is set to the default value of
0.0.0.0, no traps are forwarded for this particular value.
Host 2 Trap IP Address
Defaults to 0.0.0.0. Second destination address for SNMP traps.
Host 3 Trap IP Address
Defaults to 0.0.0.0. Third destination address for SNMP traps.
Host 4 Trap IP Address
Defaults to 0.0.0.0. Fourth destination address for SNMP traps.
System Name
A text string that can uniquely identify an SNMP managed
node.
System Contact
A text string containing the name, phone number, etc. of the
individual responsible for maintaining an SNMP managed
node.
8-8
To access other units external to the TSU 100 (proxied units) us-
ing an SNMP MIB browser, append a period and the Unit ID of
the external device to the Read Only and Read/Write community
name used in the MIB Browser, for example public.4. See Appen-
dix A, Understanding SNMP on page A-1 for more information.
TSU 100 User Manual 61202052L1-1