Explanation Of Test And Data Display - Sega AFTER BURNER CLIMAX Owner's Manual

EXPLANATION OF TEST AND DATA DISPLAY


• Do not touch any parts that are not specified in these directions. Touching
unspecified locations may lead to electric shock or cause short circuits.
• In test mode, the seat moves in response to operations irrespective of the safety
sensor or seatbelt. There are also cases in which the seat is released from its
stationary central position (level condition). While operating in test mode, make
sure that no one other than the operator is near the cabinet. Otherwise someone
could contact or collide with the cabinet, or fall down.
• Be careful if you operate the game test mode while riding in the seat.
Indiscriminate operation could cause you to fall. For safety, in performing tests
in which the seat moves, operate the control stick and gun trigger without
standing on the base.
• When the test mode completes, initialization takes place when the power is
engaged. Exercise caution as the seat moves left/right. The seat moves even if
the seatbelt is unfastened. You could come in contact with the seat or fall down;
you could also get a hand or finger caught somewhere.
• Because of the position of the switch unit, you must assume an unnatural posture
to operate in test mode, which can cause pain in the shoulder, waist, etc. You
could also get caught by parts in the coin chute door, for instance, and suffer
abrasions. Have a flashlight on hand and operate in test mode very carefully.
The door interior is dark and narrow and you could easily make mistakes in
operation.
• Be careful that a finger or hand does not get caught when opening/closing the
coin chute door.
• When you enter the Test Mode, fractional coin and bonus adder data is erased.
• Adjust the sound to the optimum volume, taking into consideration the
environmental requirements of the installation location.
• Removing the Coin Meter circuitry renders the game inoperable.