Moving The Machine - Sega AFTER BURNER CLIMAX Owner's Manual

-1 MOVING THE MACHINE

• Observe the following precautions when moving the machine. Failure to
observe these precautions may result in damage to the casters and/or the
flooring.
- The machine should be moved along a level floor.
- Ramps should be used to climb/descend steps 1 cm or greater in height.
- The machine should not be moved any faster than walking speed (about 2
km/h).
- The machine should not be tilted too far to one side or loaded excessively on
one side only.
• If the entrance is narrow or low and the product must be laid down sideways, or
if the product must be disassembled in a manner not described in this manual,
contact the office given in this manual or the point of purchase. If the product
is laid down sideways such that unexpected loads are put on the mechanical
components, there could be deformations or gaps, resulting in permanent
damages.
FIG. 7-1a

1