1-1 GREASING
• Be sure to use the designated grease. Using undesignated grease can cause
parts damage.
1
• Do not apply grease to locations other than as specified. Doing so may create
a risk of operational problems and deterioration of parts.
• The designated periods for greasing serve only as a guide. Whenever there are
squeaks or other anomalies, apply grease at designated locations.
Once every 3 months apply grease to the spring and gear mesh that turn the volume shaft.
Use Greasemate (PART NO. 090-0066).
1
Cut off the power supply.
Remove the 4 truss screws that hold the throttle cover lower. Flat washers are used with the truss screws.
FIG. 12-1a
Remove throttle cover lower.
11
FIG. 12-1b
FIG. 12-1c