How To Remove Game Board - Sega AFTER BURNER CLIMAX Owner's Manual

• When a game board is to be replaced, put the old game board with anomaly
into a special box for replacing the game board and send it. If a special box
is not available or if it has been damaged, arrange to obtain a box with the
following part number/name.
601-11691 / CARTON BOX LBG
• For replacement or repair, pack the game board and send it without
disassembling it. Order for servicing might not be accepted if any part of the
game board has been removed. If any part is removed, a service fee will be
charged even if the warranty period has not yet expired.
• Do not remove the key chip from the game board before sending the board for
servicing.

1-1 HOW TO REMOVE GAME BOARD

The game board (LINDBERGH) is located on the right side as you face the monitor (CRT) inside the base. Remove
the LINDBERGH together with the wooden base (ASSY MAIN BD) on which it has been mounted.
1
Cut off the power supply.

Remove 2 truss screws that fasten rear door R.
FIG. 18-1a
1
1