Precautions Regarding Installation Location; Limitations Of Usage - Sega AFTER BURNER CLIMAX Owner's Manual

PRECAUTIONS REGARDING INSTALLATION LOCATION


This product is an indoor game machine. Do not install it outside. Even indoors,
avoid installing in places mentioned below so as not to cause a fire, electric
shock, injury and/or malfunction.
- Places subject to rain or water leakage, or places subject to high humidity in the
proximity of an indoor swimming pool and/or shower, etc.
- Places subject to direct sunlight, or places subject to high temperatures in the
proximity of heating units, etc.
- Places filled with inflammable gas or vicinity of highly inflammable/volatile
chemicals or hazardous matter.
- Dusty places.
- Sloped surfaces.
- Places subject to any type of violent impact.
- Vicinity of anti-disaster facilities such as fire exits and fire extinguishers.
- The operating (ambient) temperature range is not from 5 to 30 degrees.

-1 LIMITATIONS OF USAGE

• Be sure to check the Electrical Specifications. Ensure that this product
is compatible with the location's power supply, voltage, and frequency
requirements. A plate describing Electrical Specifications is attached to the
product. Non-compliance with the Electrical Specifications can cause a fire
and electric shock.
• This product requires a breaker and earth mechanism as part of the location
facilities. Using the product without these can cause a fire and electric shock.
• Ensure that the indoor wiring for the power supply is rated at 15A or higher (AC
single phase 100V ~ 120V area), and 7A or higher (AC 220V ~ 240V area). Non-
compliance with the Electrical Specifications can cause a fire and electric
shock.
• Be sure to use an independent power supply equipped with an earth leakage
breaker. Using a power supply without an earth leakage breaker can cause an
outbreak of fire if a power surge occurs.
• Putting many loads on one electrical outlet can cause generation of heat and a
fire resulting from overload.
• When using an extension cord, ensure that the cord is rated at 15A or higher (AC
100V ~ 120V area) and 7A or higher (AC 220V ~ 240V area). Using a cord rated
lower than the specified rating can cause a fire and electric shock.