Game Board - Sega AFTER BURNER CLIMAX Owner's Manual

Hide thumbs Also See for AFTER BURNER CLIMAX:
Table of Contents

Advertisement

GAME BOARD

1
• When working with the product, be sure to turn the power off. Working with the
power on may cause an electric shock or short circuit.
1
• Be careful not to damage the wires. Damaged wires may cause electric shock
or short circuit or present a fire risk.
• Do not expose the game board, etc. without a good reason. Failure to observe
this can cause electric shock hazard or malfunctioning.
• Do not use this product with connectors other than those that were connected
and used with the game board at the time of shipping. Do not carelessly
connect wires to connectors that were not used at the time of shipping, as this
may cause overheating, smoke or fire damage.
• When returning the game board after making repairs or replacements, make
sure that there are no errors in the connection of connectors. Erroneous
connections can lead to electrical shock, short circuits or fires.
• When connecting a connector, check the direction carefully. Connectors
must be connected in only one direction. If indiscriminate loads are applied in
making connections, the connector or its terminal fixtures could be damaged,
resulting in electrical shock, short circuits or fires.
• In this product, setting changes are made during the test mode. The game
board need not be operated. Use the game board, etc. as is with the same
setting made at the time of shipment so as not to cause electric shock and
malfunctioning.
• Static electricity from your body may damage some electronics devices on the
IC board. Before handling the IC board, touch a grounded metallic surface so
that the static electricity can be discharged.
1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents