Explanation Of Test And Data Display - Sega Olle King Owner's Manual

9. EXPLANATION OF TEST AND DATA DISPLAY

STOP
● Do not stand on the skateboard when exiting Test Mode. The software in this
product performs detection of skateboard input values at power on and when exiting
IMPORTANT!
Test Mode. If someone is standing on the skateboard or the skateboard is overly
tilted left or right, operation of the skateboard during games will be affected.
● Do not use Test Mode when multiple units are configured for online play and a
game is in progress on another unit. This will cause errors.
● Even when multiple units are configured for online play, each seat, each game may
be given different cost settings. Incorrect cost settings may cause budget balancing
problems.
By operating the switch unit, periodically perform the tests and data check. When installing the machine
initially or collecting cash, or when the machine does not function correctly, perform checking in accor-
dance with the explanations given in this section.
The following shows tests and modes that should be utilized as applicable.
This product's basic system consists of the Chihiro game board and the GD-ROM drive. The system
enables you to play several games one after the other just by changing a GD-ROM disc that is to be set
on the GD-ROM drive.
The product supports, therefore, the following 2 test modes:
(1) System test mode for an automatic self-diagnostic test (generally used by every product that contains
the basic system) and a coin assignment (specifically used by this product) and
(2) Game test mode for testing the input/output control devices and setting the difficulty level (specifi-
cally used by this product).
www.seuservice.com 48