Coin Selector - Sega AFTER BURNER CLIMAX Owner's Manual

COIN SELECTOR

1
Handling the Coin Jam
If the coin is not rejected when the REJECT button is pressed, open the coin chute door and open the selector gate.
After removing the jammed coin, put a normal coin in and check to see that the selector correctly functions.
Cleaning the Coin Selector
• Remove and clean smears by using a soft cloth dipped in water or diluted
chemical detergent and then squeezed dry.
• Never apply machine oil, etc. to the Coin Selector.
• After cleaning the Coin Selector, insert a regular coin in the normal working
status and ensure that the selector correctly functions.
The Coin Selector should be cleaned once every 3 months.
When cleaning, follow the procedure below:
1
Turn the power for the machine OFF. Open the coin chute door.

Remove the Coin Selector from the coin chute door.

Open the gate and dust off by using a soft brush (made of wool, etc.).
FIG. 14a
1
1