10- ADJUSTMENT PROCEDURE
• Monitor adjustments have been made at the time of shipment. Therefore, do
not make further adjustment without a justifiable reason. Adjusting the monitor
which contains high tension parts is dangerous work. Also, an erroneous
adjustment can cause deviated synchronization and image fault, resulting in
malfunctioning.
• Be sure to perform appropriate adjustment of the monitor (projector). For
operation of this machine, do not leave monitor's flickering or deviation as
is. Failure to observe this can cause to worsen the players' or the customers'
physical conditions.
• Do not touch undesignated places. Touching places not designated can cause
electric shock or short circuit.
There is a monitor adjustment board at the bottom of the switch unit inside the coin chute door.
FIG. 10-3
10