Explanation Of Test And Data Display; Switch Unit And Cash Box - Sega UFO CATCHER Owner's Manual

11

EXPLANATION OF TEST AND DATA DISPLAY

11-1 SWITCH UNIT AND CASH BOX

Do not touch any areas other than those indicated. Touching other areas may
cause accidents from electrical shocks or short circuits.
If the coin meter circuit is left detached, games cannot be played.
When you open the service door at the bottom of the cabinet front panel, you will find a switch unit deep inside.
The functions of each button on the switch unit are as described below.
SELECT BUTTON (SELECT)
1P POWER KNOB (1P POWER)
SOUND VOLUME (VOL)
1P TEST BUTTON (TEST)
1P SERVICE BUTTON (SERVICE)
METER 1 (METER 1)
METER 2 (METER 2)
- VFD Display:
- 1P Power Knob:
- 2P Power Knob:
- Select Button:
- Clear Button:
- Test Button:
IMPORTANT
VFD DISPLAY
COIN METER 1P (COIN METER 1P)
FIG. 11-1
Monitor for displaying conditions such as income data.
Adjusts the strength of the 1P UFO mechanism spring.
Adjustment ranges from 00 (weakest) to 99 (strongest).
Adjusts the strength of the 2P UFO mechanism spring.
Adjustment ranges from 00 (weakest) to 99 (strongest).
Used when switching VFD display content.
Used when clearing data displayed on VFD.
Separated for 1P and 2P. Used when entering the test mode and when
completing the test mode.
STICKER DIP SW
CLEAR BUTTON (CLEAR)
2P POWER KNOB (2P POWER)
2P SERVICE BUTTON (SERVICE)
SUB POWER SUPPLY SWITCH
(SUB SW)
2P TEST BUTTON (TEST)
DIP SW 1 DIP SW 4 (See Section 12.)
COIN METER 2P (COIN METER 2P)
11
25