Roll Volume - Sega AFTER BURNER CLIMAX Owner's Manual

ROLL VOLUME

1
• When working with the product, be sure to turn the power off. Working with the
power on may cause an electric shock or short circuit.
• Be careful not to damage the wires. Damaged wires may cause an electric
shock, short circuit or present a risk of fire.
• Do not touch any parts that are not specified in these directions. Touching
unspecified locations may lead to electric shock or cause short circuits.
• This work should be performed by site maintenance personnel or other skilled
professionals. Work performed by non-technical personnel can cause a severe
accident such as an electric shock.
• To prevent accidents while working or while operating the product after it
has been installed, be sure not to conduct any procedures other than those
given in this manual. There are cases in which procedures not covered in this
manual require special tools and skills. If a procedure not given in this manual is
required, request service from the office given in this manual or from the point of
purchase.
• Exercise due caution in performing soldering procedures. If soldering iron is
handled carelessly, there could be fires or burns.
• Proceed very carefully when heating thermal contraction tube. Careless
operations can result in fires or burns.
• In performing adjustments or replacements, check the surroundings before
powering up. The product undergoes initialization automatically after the power
has been engaged. If someone is near the product and the seat moves left or
right, there could be a collision or fall.
• For maintenance of moving mechanisms, request service from the customer
service center given in this manual or from the point of purchase. Maintenance
must be performed by technicians who have taken special coursework. If
performed by anyone else, workers could suffer accidents during maintenance
and players could suffer accidents during play.
• Be careful not to get caught up in mechanical components. If finger or hand
gets caught, there could be a bone fracture or other serious injury.
When fastening plastic parts, be careful not to tighten screws and nuts excessively.
Otherwise parts may be damaged, resulting in injuries from fragments, etc.
1
11