Microswitch Replacement - Sega AFTER BURNER CLIMAX Owner's Manual

11- MICROSWITCH REPLACEMENT

If operability of the gun trigger is unsatisfactory, the problem could be a malfunction of the microswitch inside the
control stick grip.
Remove the control stick and replace the microswitch.
Use the following tools, solder and screw lock agent (PART NO. 090-0012).
11
- 2.5 mm Allen wrench or screwdriver
- 8 mm spanner, Allen screwdriver or socket wrench
- Philips screwdriver (for M4 screw)
- Soldering iron
1
Cut off the power and remove the control stick. (See 11-1.)

Press down on the rubber cover at the base
of the control stick grip.

Take out 3 screws and remove grip R. Be careful when removing the grip that parts inside the grip do not
come out and get lost.
FIG. 11-4b
10
FIG. 11-4a
FIG. 11-4c