11- GREASING
• Be sure to use the designated grease. Using undesignated grease can cause
parts damage.
• Do not apply grease to locations other than as specified. Doing so may create
a risk of operational problems and deterioration of parts.
• The designated periods for greasing serve only as a guide. Whenever there are
squeaks or other anomalies, apply grease at designated locations.
Once every 3 months, apply grease to the spring and sliding part of the mechanical component that turns the volume
shaft. Use Greasemate (PART NO. 090-0066).
FIG. 11-2
11
10