Table of Contents
Advertisement
10.3
Perform measurements
After you have created a new test, you can add measurements to the test. By
default, every test includes at least one measurement. You can add additional
measurements and clone (copy a measurement with settings) available
measurements.
To add a measurement to the test:
1. Click the Add measurement button
2. Click the new measurement in the list, and then configure the measurement
To clone a measurement, click the Clone measurement button
ribbon, and then click the measurement you want to copy. A new measurement
with the settings of the selected measurement is added to the list under
Material measurement(s).
To delete a measurement, click the Delete measurement button
ribbon, and then click the measurement you want to delete.
Note: Alternatively, you can add, clone and delete measurements by using the
corresponding commands in the Navigation pane.
To perform a single measurement, click the Start measurement(s) button
on the ribbon, point to Start single measurement, and then click the
measurement you want to start.
To perform all configured measurements, click the Start measurement(s)
button
The status bar at the bottom of the test view displays the status of
SPECTANO 100. The following table describes the SPECTANO 100 statuses.
SPECTANO 100
Table 10-4
Table 10-4
is added to the list under Material measurement(s).
as described in 10.2 "Create a new test" on page 41.
nds in the Navigation pane.
e measurement, click the
oint to Start single measureme
Start single meas
t you want to start.
t you want to start.
m all configured measurements
configured measure
on the ribbon, and then click
on the ribbon, and then click Start all measurements.
n the ribbon, and the
e status bar at the bottom of the
bar at the bott
100. The following
. The fol
ble 1
SPECTANO 100 statuses
SPECTAN
Symbol
Symbol Status
tu
Device
Device
D
connected
conn
Device busy
De
Measurement
running
Error
Data available
Not connected Device is not connected.
on the ribbon. A new measurement
page 41.
easurement nt button
ou want to copy. A new measure
nt to copy. A new me
rement is added to the list unde
is added to the lis
the Delete measurement
lete measurement button
asurement you want to delete.
ent you want
an add, clone and
d, clone and delete measu
lete
he Navigation pane
ment, click th Start m
tart
Description
Device is connected but no data/results are
available.
Test settings are being sent to the device or the
device is being reset to the Device connected
status after a measurement has finished.
A measurement is running.
An error occurred.
New data/results has been sent from the device to
SPECTANO Analyzer Suite. The device is
connected and ready to start a new
measurement.
SPECTANO Analyzer Suite
itiona
ble
A new measurement
measurement
).
configure the measureme
configure the measurement
ge 41
button
on the
on the
on the
B
43
Advertisement
Table of Contents
