Optional Idsdm Module; Removing The Idsdm Module - Dell EMC PowerEdge R650 Installation And Service Manual

Figure 103. Installing the BOSS S2 card carrier
Next steps
1. Follow the procedure listed in the

Optional IDSDM module

Removing the IDSDM module

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3. If you are replacing the IDSDM module,
NOTE: Temporarily label each SD card with its corresponding slot number before removal. Reinstall the SD cards into
the corresponding slots.
Steps
Holding the blue pull tab, lift the IDSDM module out of the system.
118 Installing and removing system components
After working inside your
Safety instructions.
Before working inside your
remove the MicroSD
system.
system.
cards.