Installing The Boss S2 Controller Card - Dell EMC PowerEdge R650 Installation And Service Manual

Figure 98. Removing the BOSS cover
Next steps
1. Replace the BOSS S2 controller card module.

Installing the BOSS S2 controller card

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
Steps
1. Slide the BOSS cover on the BOSS S2 module. Using the Phillips #1 screwdriver, secure the BOSS cover on the BOSS S2
module with the M3 x 0.5 x 4.5 mm screw.
Safety instructions.
Before working inside your system.
Installing and removing system components 115