Air Shroud; Removing The Air Shroud - Dell EMC PowerEdge R650 Installation And Service Manual

Air shroud

Removing the air shroud

Prerequisites
CAUTION: Never operate your system with the air shroud removed. The system may get overheated quickly,
resulting in shutdown of the system and loss of data.
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
Steps
1. Hold the edges of the air shroud, and lift the air shroud out of the system.
NOTE: Air shroud is not supported for T-type heat sink and liquid cooling configurations.
Figure 22. Removing the air shroud
2. For the air shroud on the rear drive module, hold the edges of the air shroud, and lift the air shroud out of the rear drive
module.
Safety instructions.
Before working inside your system.
Installing and removing system components 37